Search the Community

Siemens Simcenter MotorSolve 2020.2 | 463.5 mb The Simcenter development team is pleased to announce the availability of Simcenter Motorsolve 2020.2 is the complete design and analysis software for induction, synchronous, electronically and brush-commutated machines. Design motors based on realistic workloads The typical design sequence of electric machines involve many iterations, especially during early stages of design. And identifying the most important load points for a given design problem is difficult. In Simcenter Motorsolve 2020.2, we've added a user defined duty cycle based performance analysis capability. Therefore, the new capability allows the designers to incorporate realistic vehicle behavior into the design process and calculate losses for an arbitrary load profile. By importing the machine performance requirements from Simcenter Amesim, Simcenter Motorsolve can use this data to advance the design process. The losses and top five most important load points are calculated. Included are a number of standard drive cycles for the automotive sector. The users will have to supply the vehicle torque and rotor speed information to use the new feature. Pulse Width Modulation analysis with arbitrary voltages Calculating machine performances based on measured or arbitrary voltages using low frequency electromagnetic finite element analysis based calculations is time consuming or impractical, often due to high signal frequencies. In Simcenter Motorsolve 2020.2, the Pulse Width Modulation (PWM) analysis option can determine these results. An additional option of simulating arbitrary voltage profile based performance calculations is now part of the PWM analysis capability Therefore, digital twins or model calibrations can be based off of measurements imported directly from dynamometers or other sources. User specified arbitrary voltage profiles can be used in Simcenter Motorsolve 2020.2 to determine electric motor performance Design Halbach Array electric motors in Simcenter Motorsolve 2020.2 New templates support the creation of Halbach array patterns with even and odd numbered magnet segments per pole. It also includes the ability to apply unevenly distributed segments with user defined magnetization directions. Here's an excerpt from "What is a Halbach array and how is it used in electric motors?" by Danielle Collins highlights their benefits: "...electric motors based on the Halbach array offer measurable benefits over conventional designs, including high power density and high efficiency. One of the enablers of these benefits is that a Halbach array motor does not require laminations or back iron, so the motor is essentially ironless. This significantly reduces eddy current losses and hysteresis losses... " Halbach array template in Simcenter Motorsolve 2020.2 Maximum torque and flux weakening control Motor performance is highly dependent on the control strategy. This link impacts performance parameters like efficiency, loss and power output. In Simcenter Motorsolve 2020.2, the maximum torque per amps and flux weakening control strategy based optimal load point calculations have been added. Consequently, you can Description efficiency maps, loss maps and several others using these new control strategies. With the newly added duty cycle based analysis feature, the design process is significantly improved on account of being based on realistic vehicle behavior and control strategies. The enhancements made to the modeling capabilities of permanent magnets with regards to their irreversible demagnetization behaviour and defining permanent magnets as strong or weak in Simcenter MAGNET 2020.2 also apply to Simcenter Motorsolve. Simcenter Motorsolve is the complete design and analysis software for permanent magnet, induction, synchronous, electronically, and brush-commutated machines. It leverages the fast nature of equivalent circuits and the accuracy of FEA, with the synergy of automating the nonproductive tasks for rapid and accurate analysis of electric machines. Our products template-based interface is easy to use and flexible enough to handle practically any motor topology, with provision for custom rotors and stators. Typical FEA operations such as mesh and solver refinements, winding design, motion, and post-processing including the export of 1D models, are not required as the software handles these for the user. Performance parameters, waveforms, and field Descriptions are available with just a click. With the new version 2020.2 just released, check this to see the highlights of the new version, including Duty Cycle based design and analysis of electric machines, and new Halbach array templates. Using Simcenter MAGNET & Motorsolve At the 2019 Siemens Media & Analyst Conference in New York, Siemens PLM Software announced that it is changing its name to Siemens Digital Industries Software. The company explains that the change reflects not only its position inside the core operating company, Siemens Digital Industries, but also its evolution from product lifecycle management (PLM) software to a broad provider of industrial software and services for digitalization. Product: Siemens Simcenter MotorSolve Version: 2020.2 Supported Architectures: x64 Website Home Page : www.plm.automation.siemens.com Language: english System Requirements: PC * Size: 463.5 mb System requirements: - Windows 10 x64 version 1909 Operating systems should include the latest Microsoft published updates. - Microsoft.NET Framework 4.5.2 or higher is required The recommended minimum hardware requirements are: - Processor: Intel Core i5 or AMD FX - 2GB RAM - 40 GB of free disk space - Minimum screen resolution of 1280 x 1024 with normal font size selected and scaling set to 100% - Graphics card: OpenGL compatible video card DOWNLOAD http://nitroflare.com/view/BC7E0BB3F7CBD18/6mg3o.NeCeMmosL202.rar http://nitroflare.com/view/A4745507AB4F8D1/6mg3o.SimcenterMotorsolve20202rh.rar https://rapidgator.net/file/90ac61d8012202793ad5700046f35a51/6mg3o.NeCeMmosL202.rar https://rapidgator.net/file/e368b7227ce1c6be39ae20cf02b9b210/6mg3o.SimcenterMotorsolve20202rh.rar

File size: 466 MB Siemens Digital Industries Software announced releases of Siemens Simcenter MAGNET software and Simcenter Motorsolve software for simulating electric motor design and electromagnetic fields at any stage of the design process. Electric traction motors must be durable and NVH-compliant, however, electromagnetic forces induce mechanical vibrations which may lead to failure. The Simcenter MAGNET and Simcenter Motorsolve solution calculates the behavior of electromagnetic forces on individual components, providing examination of the structure and materials integrities under multiple operating conditions during any phase of the design process. These capabilities are important for implementing a realistic digital twin of electric and hybrid electric vehicle powertrains or for any application where NVH constraints are critical, such as aerospace, industrial and medical equipment. Siemens' approach to NVH analysis is unique since the Simcenter Motorsolve tool uses smart 2.5D technology to generate a 3D nodal force mesh model based on 2D simulations. Net forces on components can be determined using Simcenter MAGNET software, even when they are in contact, including artificial component grouping. Simcenter SPEED PC-BDC models can be imported into Simcenter Motorsolve software for higher-resolution finite element simulations, and Simcenter 3D electromagnetic software integration can provide electric motor simulation performance. Now, design engineers can apply a range of real-world conditions in their electro-vibro-acoustic simulation analysis. Motor and generator designers can use this software for quick virtual prototyping. MotorSolve simulates machine performance using equivalent circuit calculations and our unique automated finite element analysis engine. Typical FEA operations, such as mesh refinements and post-processing, are not required as MotorSolve handles these for the user. The template-based interface is easy to use and flexible enough to handle practically any motor topology. Custom rotors and stators can be imported via DXF. Whats New https://www.mentor.com/products/mechanical/motorsolve/ HOMEPAGE https://www.mentor.com/ DOWNLOAD http://nitroflare.com/view/36F2415DB6C3938/x1rpe.Siemens.Simcenter.MotorSolve.2020.2.x64.rar https://rapidgator.net/file/56a19d1bf1d31a879cae48088ad7bed6/x1rpe.Siemens.Simcenter.MotorSolve.2020.2.x64.rar

Siemens Simcenter FloVENT 2020.2 (x64) | File size: 875 MB FloVENT is powerful computational fluid dynamics (CFD) software that predicts 3D airflow, heat transfer, contamination distribution and comfort indices in and around buildings of all types and sizes. FloVENT's fast and easy-to-use menu system is designed specifically for engineers involved in the design and optimization of heating, ventilating and air conditioning (HVAC) systems. Create Intelligent Models FloVENT features the most complete and technically advanced model creation environment for HVAC airflow modeling design: Models that range in scale from diffusers, heat exchangers, grilles, CRAC units and enclosures are assembled quickly from a complete set of SmartParts (intelligent model creation macros). SmartParts capture modeling expertise streamlines model creation, minimizes solve times and maximizes solution accuracy. Robust Structured Cartesian Mesher Minimizes Solution Time FloVENT uses a structured-Cartesian grid method - the most stable and numerically efficient type available. The ability to localize is also included for finer resolution where it is needed, minimizing solution time and avoiding the penalty of grid cells that "bleed." Finely-tuned Solver For over 25 years, the FloVENT solver has specifically addressed heating, ventilation and air conditioning (HVAC) applications: The solver, based on a Cartesian gridding system, delivers the most accurate results possible and the fastest solution time per grid cell. Massive disparity in geometric length scales are resolved using the unique 'localized-grid' technique which allows for integrally matched, nested, non-conformal grid interfaces between different parts of the solution domain. The conjugate nature of heat transfer is concurrently solved using a preconditioned conjugate residual solver together with a flexible cycle multi-grid solution technique. Pragmatic, unique and accurate solution termination criteria produce useful results in engineering, not academic, time scales. Powerful Visualization Tools Fully rendered models, 3D flow animation and tools for dynamic manipulation of temperature and flow results, enable engineers to pinpoint thermal and ventilation issues and visualize design improvements quickly and effectively. Texture mapping and video output enables powerful communication of design concepts with non-technical colleagues and customers. Whats New: Updates: official site does not provide any info about changes in this version. HOMEPAGE https://www.mentor.com/ DOWNLOAD http://nitroflare.com/view/30FE928ADED6DC4/vv9sp.Siemens.Simcenter.FloVENT.2020.2.x64.rar https://rapidgator.net/file/7641a479b4de8185ae19ebe9c161187c/vv9sp.Siemens.Simcenter.FloVENT.2020.2.x64.rar

Siemens Simcenter MAGNET Suite 2020.2 (x64) | 712 MB Simcenter MAGNET - electromagnetic field simulation, analysis and virtual 2D-3D modeling software Simcenter MAGNET 2D / 3D is a powerful simulator for predicting the performance of motors, generators, sensors, transformers, actuators, solenoids, and any permanent magnet or coil component. With this efficient and accurate software, you can optimize, design and analyze both simple and complex devices with electromagnets as well as electromechanical devices. Create virtual prototypes with Simcenter MAGNET saves labor. Parametric studies and optimization analyzes allow you to explore multiple configurations to achieve performance improvements. Accurate reproduction of operating conditions as well as extreme conditions allows for the identification of losses and hot spots, demagnetization of the permanent magnet, unused material, and analysis of damage under failure conditions. Year / Release Date: 2020 Version: 2020.2 Developer: Siemens PLM / Infolytica Bit depth: 64bit Interface language: English System requirements: Win7 / 8.1 / 10 64-bit What News? Read: Simcenter_MAGNET_Suite_2020_2_rh.pdf https://www.plm.automation.siemens.com/global/en/products/simcenter/magnet.html https://ddownload.com/gvw9jvlk3lxa http://nitroflare.com/view/C4B1E69F092451B/Siemens.Simcenter.MAGNET.Suite.2020_2.rar https://rapidgator.net/file/ba52ca490e3f8d9cc0c92a8233a7e5e5/Siemens.Simcenter.MAGNET.Suite.2020_2.rar.html https://uploadgig.com/file/download/096aEe9b278Fb19f/Siemens.Simcenter.MAGNET.Suite.2020_2.rar

MP02 for Siemens Solid Edge 2021 (x64) x64 | File Size: 333 MB Solid Edge is the most full-featured hybrid 2D / 3D CAD system that uses synchronous technology to accelerate design and editing process, as well as enhanced support for reusing imported geometry. Solid Edge is a key component of the Velocity Series solution portfolio and features excellent tools for modeling parts and assemblies, drawing designs, transparent data management, and an integrated finite element analysis module that allows you to successfully cope with the increasing complexity of designed products. The new version of Solid Edge offers enhanced functionality based on synchronous technology, which significantly speeds up the product design process, simplifies the modification, import and application of data created in various CAD systems. The latest version includes improvements in finite element analysis, design data management, and over a thousand user-defined changes. Implementing the concept of synchronous technology, Siemens PLM Software has expanded the possibilities of using synchronous technology in the entire system. In addition to support for modeling parts and sheet bodies implemented in previous versions, synchronous models can be used directly in assemblies - for example, in the design of pipelines, trusses, electrical wiring, and other types of products. First introduced associativity between synchronous parts, which allows the user to create and edit his idea before, during or at the end of the assembly design process. Solid Edge provides the ability to work with both synchronous and conventional (ordered in the construction tree) structural elements in a single integrated design environment. Users can use synchronous structural elements to speed up the design process and flexible editing of models, and elements with a construction tree - for designing cast parts and parts obtained by machining. Elements with a construction tree in existing models can be selectively converted to synchronous, which gives the designer more flexibility and ease of use of the system. As the number of enterprises making the transition from other 3D systems to Solid Edge and using the advantages of synchronous technology is growing, the possibility of combining 2D drawings with existing 3D models has emerged - another way to increase productivity. Technological dimensions in 2D drawings can now be automatically transferred to the appropriate imported 3D model. The resulting "production" 3D dimensions can be edited immediately, and the imported 3D model changes simultaneously due to synchronous technology. Solid Edge has an application for finite element analysis, including new types of loads - torque and load in a cylindrical support, user-defined constraints, as well as new ways of connecting parts in assemblies, such as bolted connections and rib connections for sheet metal parts. The tools to simplify models allow you to quickly get the results of calculations, and improved visualization tools - to see the model from the inside. The model can be adjusted using either synchronous technology or using a construction tree. Solid Edge provides control of models of parts and assemblies in the early stages of design, which reduces the time to market products and the cost of manufacturing prototypes. In Solid Edge, thousands of customer-defined improvements that further increase the return on this product at all stages of the product design process. New functionality has appeared in various modules, including modeling of sheet bodies, pipelines and truss structures, assembly management and drawing tools. Improvements in the design environment of sheet bodies include new types of corner closures, an element for etching part designators and other geometry, as well as technological elements in the development of sheet metal parts, for example, shipping ears. Solid Edge continues to raise the bar in the field of creating drawings, in which you can now transfer all technological dimensions and designations, designations of parts in the assembly, and even represent parts with different colors of lines in the drawing, borrowing them from the 3D model. New "international" drawings allow you to use different sets of characters in different languages of the world in one drawing or in one callout. The simplified user interface includes a fully customizable radial menu, which reduces the number of mouse movements. Transparent dialogues for managing structural elements and details, as well as dialogs for reduced-sized commands, provide the largest area of the graphic workspace. Details: MP02 for Siemens Solid Edge 2021 Year / Release Date:2020 Version:2021 MP02 build 221.00.02.004 Developer:Siemens PLM Software Architecture:64bit Interface language:Multi-language Tabletka:Present ( TeAM SolidSQUAD-SSQ) System Requirements:Pre-installed Solid Edge 2020 Supported Languages ATTENTION! This is only an update! For installation, you must have a pre-installed Solid EDge 2021 https://ddownload.com/7in8nt07dsfa http://nitroflare.com/view/42EC433D101F3BD/Siemens.Solid.Edge.2021.MP2.Update-SSQ.rar https://rapidgator.net/file/aac8122cd76336278890c1319726474b/Siemens.Solid.Edge.2021.MP2.Update-SSQ.rar.html https://uploadgig.com/file/download/cfdb2c27cDC88171/Siemens.Solid.Edge.2021.MP2.Update-SSQ.rar

Siemens PLM NX 12.0.2 (NX 12.0 MR2) Siemens PLM NX 12.0.2 (NX 12.0 MR2) | 6.3 Gb Siemens PLM Software is pleased to announce the availability of NX 12.0.2 (NX 12.0 MR2), its an integrated product design, engineering and manufacturing solution that helps you deliver better products faster and more efficiently. NX 12.0.2 is an accumulation of fixes and small enhancements built. What's new in NX 12.0.2: Teamcenter Integration for NX - Object type assignment for new items in Project - Publishing NX part data to Teamcenter - ECNs for change management - Teamcenter integration with Additive Manufacturing Fundamentals - NX Virtual Reality - Fly-through - Measure - Enhancements to the Table Editor layout - Attribute enhancements Data translation - Exporting and importing component reflection data Mechatronics Concept Designer - Enhancements to Mechatronics Concept Designer with PLCSIM Adv integration - Collision Sensor enhancements - Simulating only the active displayed part - External Signal Configuration usability enhancements - External Signal Configuration support for OPC UA protocol - Animation Designer integration enhancement For more information about these and other enhancements, see the What's New Guide included with the NX 12.0.2 help. Welcome to NX 12.0.2. July 2018 - Dear Customer: NX 12.0.2 brings significant new functionality to all areas of the product, and we believe the new and enhanced functions will help you work more productively. With this release, we continue to provide innovative ways to deliver solutions that meet the next generation of your product design, development, and manufacturing challenges. NX 12.0.2 is robust and powerful, and it delivers advanced technologies for product design, development, and manufacturing in a single, multidisciplinary platform. This release introduces new assembly load options that can significantly reduce load time on massive datasets. It continues to deliver best-in-class customer deployment readiness, and builds on the productivity and stability achievements of the previous release. We are confident that NX 12.0.2 transforms the way products come to life, and it will empower you to achieve your next generation of innovation. About Siemens PLM Software. Siemens PLM Software is a world-leading provider of product lifecycle management and manufacturing operations management software. We help thousands of companies realize innovation by optimizing their processes, from planning and development through manufacturing, production and support. Product: Siemens PLM Version: NX 12.0.2.9 Supported Architectures: x64 Language: multilanguage System Requirements: PC Supported Operating Systems: Microsoft Windows 10 Pro and Enterprise editions Size: 6.3 Gb Note that while Maintenance Release NX 12.0.2 will replace the previous base installation of NX 12.0.0 (or NX 12.0.1), it is also itself a complete base installation and therefore does not require NX 12.0.0 (or NX 12.0.1) to be previously installed. -:DOWNLOAD FROMLINKS:- RapidGator https://rapidgator.net/file/da7e55c8f64052fc190ac545d9db9014/NX.12.0.2.part1.rar.html https://rapidgator.net/file/d40391300605825a4d4762e7bc7dd4ec/NX.12.0.2.part2.rar.html https://rapidgator.net/file/72a661e33a2d7670c7cfad79b913b714/NX.12.0.2.part3.rar.html https://rapidgator.net/file/ca4a3a6465f397d1cbcb66d86591bbac/NX.12.0.2.part4.rar.html https://rapidgator.net/file/557e99bd3fc5f7f7717420a89bdc46bf/NX.12.0.2.part5.rar.html https://rapidgator.net/file/7f9485cad48cb172d57fb98e0c775384/NX.12.0.2.part6.rar.html https://rapidgator.net/file/8426af70867539f50a7ceee0dab1195b/NX.12.0.2.part7.rar.html NitroFlare http://nitroflare.com/view/A69DCEC1D83B34A/NX.12.0.2.part1.rar http://nitroflare.com/view/68E920BE1C60F12/NX.12.0.2.part2.rar http://nitroflare.com/view/D0F4A4242907153/NX.12.0.2.part3.rar http://nitroflare.com/view/A13EDAA81E43A5B/NX.12.0.2.part4.rar http://nitroflare.com/view/B194AF777076A19/NX.12.0.2.part5.rar http://nitroflare.com/view/81964607A8450DD/NX.12.0.2.part6.rar http://nitroflare.com/view/6EEA8A432681703/NX.12.0.2.part7.rar Don't forget to say Thanks !!!