Virtual Audio Cable 4.15

[tabele]

Virtual Audio Cable is a Windows WDM multimedia driver allowing you to transfer audio (wave) streams from one application to another. It creates a set of "Virtual Cables" each of them consists of a pair of the waveform input/output devices. Any application can send audio stream to an output side of a cable, and any other application can receive this stream from an input side. All transfers are made digitally, providing NO sound quality loss. VAC is a "wave-version" of the "MIDI loopback cable" like MultiMid or Hubi's Loopback drivers.

If more than one applications are sending audio to VAC, it will mix all streams together. If more than one applications are receiving audio from VAC, it will share the same audio data between all targets.

VAC is useful to record application's audio output in real time (for example - Generator, Reality or other software synth), or transfer a sound stream to another application processing it. You can, for example, use two or more software audio generators/synthesizers/sequencers to produce audio streams sending them to VAC Out, and record the mixed stream from VAC In using any recording software - Windows Sound Recorder, Sound Forge, WaveLab, Cool Edit, Gold Wave, Cakewalk, Cubase etc.

Features

Windows 2000/XP/2003/Vista platforms (32-bit and 64-bit).

Native WDM/KS audio technology.

Up 256 Virtual Cables (Windows limits number of MME devices to 32. Number of DirectSound devices is not limited).

1..20 milliseconds per interrupt.

1..100 pin instances.

Almost any of fixed point PCM audio formats (200..1000000 samples per second, 8..32 bits per sample, 1..8 channels). Floating point formats are not supported.

Almost no sound latency with maximal interrupt frequency.

Unlimited number of clients connected to each port.

Signal mixing (with saturation) between output port clients.

PCM format conversion.

Volume control features.

Control Panel application to dynamically configure cables.

Audio Repeater application that transfers from any Wave In to any Wave Out port.

Version 4.06 (15.05.07)

Fixed installer bug caused the driver to stay disabled after installation.

Removed a debug break instruction caused a bugcheck in rare cases.

Version 4.05 (12.05.07)

Added a clock correction feature.

Added configuration options for source line set (affects endpoint creation in Vista).

Changed service name in INF file to eliminate conflicts with VAC 3.

Added more correct multi-channel support under Vista.

Added a workaround for Vista portcls.sys bug (a miniport stream can be destructed without been stopped).

Removed the "Mic" source line (capture endpoint in Vista) from the default source line set.

Changed "Milliseconds per interrupt" default value to 7 to improve DirectSound stability.

Improved stream stability on short buffering times.

Changed the Control Panel interface.

Version 4.04 (31.12.06)

Fixed a bug in topology description (fake recording controls were not accessible).

Fixed some synchronization bugs (the system hangs while several cables are heavily used).

Added a pitch (frequency) shifting support.

Added a limited Vista support.

Version 4.03 (16.07.06)

Fixed a bug that caused change of signal pitch. This issue was previously considered as DirectSound bug and was described in FAQ section related to speech engines. This section has been removed from the FAQ.

Version 4.02 (22.05.06)

Added 64-bit binaries.

Some minor corrections

Download:

http://rapidshare.com/files/33990563/Virtual_Audio_Cable_4.6.0.1359.rar

Rar pass: www.2baksa.net

[isemcaiel]

Program hakkında Türkçe bir açıklama mevcut olmadığı için basitçe ne işe yaradığı hakkında bilgi vereyim.Diyelimki messenger'da bir arkdaşınız ile sesli görüşme yapıyorsunuz.Dinlediğiniz şarkıyı ona dinletmek için programı kullanabilirsiniz.Outputtan çıkan ses input'a yönlendirilir.Output ve input arasında sana bir kablo bağlantısı kurmuş olursunuz.

[uN1versum]

 

 

Virtual Audio Cable 4.15 Retail | 1.1 Mb

 

Virtual Audio Cable screenshot 1Virtual Audio Cable screenshot 2Virtual Audio Cable screenshot 3Virtual Audio Cable birçok sanal ses kaydı ya da kayıt aygıtı yaratmanızı sağlayan bir araçtır ve bu sayede bunları ses kalitesinde en ufak bir azalma bile yaşamadan diğer herhangi bir programla kullanabilirsiniz.

 

İster stereo olsun ister müzik aleti, bilgisayarınıza herhangi bir harici aygıt bağlayabilir ve bilgisayarınızda sanal bir aygıt yaratabilirsiniz. Ve sonra bu sanal aygıtı istediğiniz programla ilişkilendirebilirsiniz. Mesela hoparlörlerinizden gelen her şeyi ses kalitesinde herhangi bir kayıp olmadan (ki bu çok yaygın bir sorun) kaydedebilirsiniz.

 

Yapılandırma seçeneği size mümkün olan en iyi ses çıktısını elde edebilmek için bir düzineden fazla değişeni değiştirme şansı verir; fakat bu bazen birkaç dakikalık deneme ve yanılmaya mal olabilir.

 

Virtual Audio Cable bilgisayarında ses kaydı yapmak isteyen her kullanıcı için kullanışlı bir araçtır. Aslında bu program istediğiniz tüm programlar ve uygulamalarla ilişkilendirebileceğiniz 256'ya kadar sanal kablo üretebilir.

 

homepage:http://software.muzychenko.net/eng/vac.htm

http://rapidgator.net/file/a01ca8a4fccb3f5c780849830d353cfc
http://nitroflare.com/view/B757B26BE7CD625