Jump to content
Son zamanlarda artan kullanıcı hesap hırsızlıkları sebebiyle tüm kullanıcılara şifre sıfırlama maili gönderilmiştir. Lütfen güveli şifreler seçiniz. Mevcut e-mail adresinize erişemiyorsanız, en aşağıdaki destek linkinden bize ulaşınız. ×

Usb Multiboot 2017 Uefi-legacy Acronis Recoveryedition 3


köylü
 Share

Recommended Posts

1 saat önce, firtinasesi yazdı:

Please register to see this content.

 

boot/grub/ içerisindeki 312 Kb lik dosyalardan bahsediyorum BOOTICE.exe ile hepsinde aynı görünüyor. HxD editör ile de BCD ilişkilendirme yerini bulamadım. ilginize teşekkürler 

bu konuda gereken cevabı @oguzhan43 başka bir konu başlığı altında cevap yazmıştı zaten

 

 

  • Like 1
Link to comment
Share on other sites

3 saat önce, firtinasesi yazdı:

Please register to see this content.

 

boot/grub/ içerisindeki 312 Kb lik dosyalardan bahsediyorum BOOTICE.exe ile hepsinde aynı görünüyor. HxD editör ile de BCD ilişkilendirme yerini bulamadım. ilginize teşekkürler 

o dosyalar boot klasöründeki bootmgr yi çağırıyor

dolayısı ile o bootmgr ye ait bcd dosyalarını editlemelisiniz

tek bootmgr den birden çok bcd çağırılmış grldr dosyalarındaki komutları incelersen ne demek istediğimi anlarsın 

 

Edited by oguzhan43
  • Like 1
Link to comment
Share on other sites

Acronis içerisinde BCA  ile eşleştirildiği satırı,
SSTR nin içerisinde BCS ile eşleştirildiği satırı bulamıyorum.
Satrıları bulsam eşleştirmeyi kendim yapacağım
efi bölümünde istediğim dosyayı editleyip ekliyorum.
Normal BOOT bölümünde bulamadım. sorum bu yönde
Bu SSTR ve Acronis Dosyalarını Hangi proğramla editleyeceğim,
yapan arkadaş varsa bana en soldaki satır numarasını yazarsa
kendime onu örnek alıp yeni dosya ekleme şansım olacak.
Bütün uğrasım Lazesoft Recovery Windows Password 
isosunu silip içerisindeki wim dosyasını kullanmak
bu işi uefi li bölümde hallettim.
Ancak normal boot bölümünde iso ile kullanabiliyorum.
O da bana bir flash da 350-400 Mb fazladan yer işgal ediyor.
İnşallah meramımı anlatabilmişimdir. İlginize teşekkür ederim.

Link to comment
Share on other sites

29 dakika önce, firtinasesi yazdı:

Acronis içerisinde BCA  ile eşleştirildiği satırı,
SSTR nin içerisinde BCS ile eşleştirildiği satırı bulamıyorum.
Satrıları bulsam eşleştirmeyi kendim yapacağım
efi bölümünde istediğim dosyayı editleyip ekliyorum.
Normal BOOT bölümünde bulamadım. sorum bu yönde
Bu SSTR ve Acronis Dosyalarını Hangi proğramla editleyeceğim,
yapan arkadaş varsa bana en soldaki satır numarasını yazarsa
kendime onu örnek alıp yeni dosya ekleme şansım olacak.
Bütün uğrasım Lazesoft Recovery Windows Password 
isosunu silip içerisindeki wim dosyasını kullanmak
bu işi uefi li bölümde hallettim.
Ancak normal boot bölümünde iso ile kullanabiliyorum.
O da bana bir flash da 350-400 Mb fazladan yer işgal ediyor.
İnşallah meramımı anlatabilmişimdir. İlginize teşekkür ederim.

siz ne eklemek istiyosunuz bootmgr ye dokunmayacaksınız

aşağıdakilerin hepsi grldr dosyasıdır ve içeriklerine bootice ile start menu editör den ulaşabilirsin 

win7pe64
debug off
map --mem /boot/bootmgr (rd)
write --offset=0x105E (rd)+1 \xEB\x08
write --offset=0x54696 (rd)+1 0
chainloader (rd)+1
root ()

acronis
debug off
map --mem /boot/bootmgr (rd)
write --offset=0x105E (rd)+1 \xEB\x08
write --offset=0x54696 (rd)+1 a
chainloader (rd)+1
root ()

dlc1064
debug off
map --mem /boot/bootmgr (rd)
write --offset=0x105E (rd)+1 \xEB\x08
write --offset=0x54696 (rd)+1 e
chainloader (rd)+1
root ()

dlc1086
debug off
map --mem /boot/bootmgr (rd)
write --offset=0x105E (rd)+1 \xEB\x08
write --offset=0x54696 (rd)+1 l
chainloader (rd)+1
root ()

SSTR
debug off
map --mem /boot/bootmgr (rd)
write --offset=0x105E (rd)+1 \xEB\x08
write --offset=0x54696 (rd)+1 s
chainloader (rd)+1
root ()

win81pex64
debug off
map --mem /boot/bootmgr (rd)
write --offset=0x105E (rd)+1 \xEB\x08
write --offset=0x54696 (rd)+1 1
chainloader (rd)+1
root ()

win81pex86
debug off
map --mem /boot/bootmgr (rd)
write --offset=0x105E (rd)+1 \xEB\x08
write --offset=0x54696 (rd)+1 2
chainloader (rd)+1
root ()

win1064pe
debug off
map --mem /boot/bootmgr (rd)
write --offset=0x105E (rd)+1 \xEB\x08
write --offset=0x54696 (rd)+1 3
chainloader (rd)+1
root ()

win1086pe
debug off
map --mem /boot/bootmgr (rd)
write --offset=0x105E (rd)+1 \xEB\x08
write --offset=0x54696 (rd)+1 4
chainloader (rd)+1
root ()
 

kırmızı lara dikkat bc den sonraki son harftir 

örneğin win1086pe=bc4

yani win1086 için bc4 ü bcd editörle editleyeceksin :)

  • Like 1
Link to comment
Share on other sites

On 24 Nisan 2017 at 11:51, crasadure yazdı:

m3.JPG.8a835e350188eb5a23816479907988cb.JPG

yukarıdaki resimde görüldüğü gibi No:2 olan seçeneği seçip "Set Accessible" butonuna basın..."UEFI" partition aktif olacak....bat dosyasına yazacağınız harf ise "H" harfi olacak

gerçek makşnada uefi sandiski seçiyorum menu geliyor tıklayınca resimdeki hatayı veriyor

Please register to see this content.

Link to comment
Share on other sites

3 saat önce, oguzhan43 yazdı:

acronis
debug off
map --mem /boot/bootmgr (rd)
write --offset=0x105E (rd)+1 \xEB\x08
write --offset=0x54696 (rd)+1 a
chainloader (rd)+1
root ()

kırmızı kısım tek harf olmak zorunda mı? a değil de acronis olarak ayarlayamazmıyız?

Link to comment
Share on other sites

7 saat önce, hikmetim yazdı:

ayrıca virtual machine usbboot da denedim uefi menuler çalışıyor.

UEFI partition kısmında yer alan BCD dosyasına *.bat dosyası ile path'ler yazdırılmış mı? kontrol edin

UEFI partition içindeki UEFI/Microsoft/Boot/BCD dosyasını BCEDIT ile editleyip resim görüntüsü koyarmısın?

Ayrıca MULTIBOOT partition içinde bootiso86.wim ve bootiso64.wim dosyalarının olup olmadığını kontrol ediniz

Link to comment
Share on other sites

39 dakika önce, crasadure yazdı:

UEFI partition kısmında yer alan BCD dosyasına *.bat dosyası ile path'ler yazdırılmış mı? kontrol edin

UEFI partition içindeki UEFI/Microsoft/Boot/BCD dosyasını BCEDIT ile editleyip resim görüntüsü koyarmısın?

Ayrıca MULTIBOOT partition içinde bootiso86.wim ve bootiso64.wim dosyalarının olup olmadığını kontrol ediniz

.bat dosyasını çalıştırdım bir sorun gözükmedi.dediğim gibi sanalda uefi menü çalışıyor ama gerçek makşnada hataveriyor acaba benim cihazdamı sıkıntı var.

5 dakika önce, hikmetim yazdı:

.bat dosyasını çalıştırdım bir sorun gözükmedi.dediğim gibi sanalda uefi menü çalışıyor ama gerçek makşnada hataveriyor acaba benim cihazdamı sıkıntı var.

Please register to see this content.

Dell ve asus 2 tane laptop var ikisindede aynı hatayı veriyor uefi de.lagacy de bir sorun yok.

Link to comment
Share on other sites

7 dakika önce, crasadure yazdı:

@hikmetim

görünürde bir problem gözükmüyor! anlam veremedim.birde bootice ile partisyon yapılarını koyunda ona da bakayım bari!

 

kusura bakma seni de uğraştırdım.multibootkit 2.1.1 ile flash yaptığımda uefi çalışıyordu.menüler karışık olduğu için koylu arkadaşınkini deneyim dedim.köylü arkadaşın daha önceki acronis paylaşımlarındada sorun yoktu.ben gene eskisine döneyim gene de sağol cevapladığın tşk.

Please register to see this content.

Link to comment
Share on other sites

Bir saat önce, hikmetim yazdı:

kusura bakma seni de uğraştırdım.multibootkit 2.1.1 ile flash yaptığımda uefi çalışıyordu.menüler karışık olduğu için koylu arkadaşınkini deneyim dedim.köylü arkadaşın daha önceki acronis paylaşımlarındada sorun yoktu.ben gene eskisine döneyim gene de sağol cevapladığın tşk.

Please register to see this content.

valla görünen bir hata yok...belkide benim gözden kaçırdığım birşey olabilir! @köylü üstad müsait zamanda cevap verir eminim! kusura kalma yardımcı olamadık

Link to comment
Share on other sites

köylü hocam elinize sağlık. 

doğru mu anlamışım acaba 

-ilk tib dosyasını indirdim

-ilk tib dosyasına uygun patch   indirdim çalıştırdım.

-oluşturulan yeni tib dosyası imajını belleğime yükledim.

- daha sonra bcdautoset.bat  dosyasını çalıştırdım.  (ilk harfi h sizinki gibi) aldığım sonuç aşağıda

 

 

C:\Windows\system32>cd /d "G:\EFI\Microsoft\Boot\"
Sistem belirtilen sürücüyü bulamıyor.

C:\Windows\system32>rem >> edit menu Windows 7-8-10 Kurulumu Uefi

C:\Windows\system32>set "bootfile=\boot\bootiso64.wim"

C:\Windows\system32>set "identifier={default}"

C:\Windows\system32>bcdedit /store bcd /set {default} device ramdisk=[h:]\boot\bootiso64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {default} osdevice ramdisk=[h:]\boot\bootiso64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win10PE SE From Dlc Uefi

C:\Windows\system32>set "bootfile=\DLC1\W10PE\W10x64.wim"

C:\Windows\system32>set "identifier={6e700c3b-7cca-4b2b-bca6-5a486db4b4ec}"

C:\Windows\system32>bcdedit /store bcd /set {6e700c3b-7cca-4b2b-bca6-5a486db4b4ec} device ramdisk=[h:]\DLC1\W10PE\W10x64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {6e700c3b-7cca-4b2b-bca6-5a486db4b4ec} osdevice ramdisk=[h:]\DLC1\W10PE\W10x64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win8.1PE Uefi From Koylu

C:\Windows\system32>set "bootfile=\boot\win8.1pex64.wim"

C:\Windows\system32>set "identifier={1584ef96-c13d-4ee2-b1b1-8fce4a0834a1}"

C:\Windows\system32>bcdedit /store bcd /set {1584ef96-c13d-4ee2-b1b1-8fce4a0834a1} device ramdisk=[h:]\boot\win8.1pex64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {1584ef96-c13d-4ee2-b1b1-8fce4a0834a1} osdevice ramdisk=[h:]\boot\win8.1pex64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win7pe64 Uefi From Koylu

C:\Windows\system32>set "bootfile=\boot\win7pe64.wim"

C:\Windows\system32>set "identifier={ebb0ef9d-19d7-47a6-8f0a-ec37ffa958fb}"

C:\Windows\system32>bcdedit /store bcd /set {ebb0ef9d-19d7-47a6-8f0a-ec37ffa958fb} device ramdisk=[h:]\boot\win7pe64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {ebb0ef9d-19d7-47a6-8f0a-ec37ffa958fb} osdevice ramdisk=[h:]\boot\win7pe64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Acronis True Image 2017

C:\Windows\system32>set "bootfile=\boot\Acronis.wim"

C:\Windows\system32>set "identifier={d314f67b-45b3-4dac-b244-46a733f2583c}"

C:\Windows\system32>bcdedit /store bcd /set {d314f67b-45b3-4dac-b244-46a733f2583c} device ramdisk=[h:]\boot\Acronis.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {d314f67b-45b3-4dac-b244-46a733f2583c} osdevice ramdisk=[h:]\boot\Acronis.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win10 pe Uefi From SSTR

C:\Windows\system32>set "bootfile=\SSTR\strelec10x64Eng.wim"

C:\Windows\system32>set "identifier={e72b0465-e063-4b8b-8dc8-694b55012f0b}"

C:\Windows\system32>bcdedit /store bcd /set {e72b0465-e063-4b8b-8dc8-694b55012f0b} device ramdisk=[h:]\SSTR\strelec10x64Eng.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {e72b0465-e063-4b8b-8dc8-694b55012f0b} osdevice ramdisk=[h:]\SSTR\strelec10x64Eng.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win10PE Uefi From Koylu

C:\Windows\system32>set "bootfile=\BOOT\win1064pe.wim"

C:\Windows\system32>set "identifier={e99edec5-fad0-48b2-8a0b-1bccf29ea1ba}"

C:\Windows\system32>bcdedit /store bcd /set {e99edec5-fad0-48b2-8a0b-1bccf29ea1ba} device ramdisk=[h:]\BOOT\win1064pe.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {e99edec5-fad0-48b2-8a0b-1bccf29ea1ba} osdevice ramdisk=[h:]\BOOT\win1064pe.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>pause
Press any key to continue . . .

 

Link to comment
Share on other sites

  • Editor
42 dakika önce, hikmetim yazdı:

kusura bakma seni de uğraştırdım.multibootkit 2.1.1 ile flash yaptığımda uefi çalışıyordu.menüler karışık olduğu için koylu arkadaşınkini deneyim dedim.köylü arkadaşın daha önceki acronis paylaşımlarındada sorun yoktu.ben gene eskisine döneyim gene de sağol cevapladığın tşk.

Please register to see this content.

uefi bölümüne unhide tıkla multiboot bölümü H olarak açıkta kalması lazım eğer uefi bölümü açığa çıkmazsa flashı sök yeniden tak yine çıkmazsa partition wizard programı ile unhide yap uefi bölümünün harfini öğrenmen lazım ondan sonra ikinci satırı uefi nin harfine göre düzenle bat dosyasını yönetici olarak yeniden çalıştır

image.jpeg

burada partition bölümünü uefi yapmışsın ntfs bölümü yaparsan sorun düzelir yani aynen diske gösterdiğin gibi usb nin ilk bölümünü göstereceksin

 

27 dakika önce, naturel yazdı:

köylü hocam elinize sağlık. 

doğru mu anlamışım acaba 

-ilk tib dosyasını indirdim

-ilk tib dosyasına uygun patch   indirdim çalıştırdım.

-oluşturulan yeni tib dosyası imajını belleğime yükledim.

- daha sonra bcdautoset.bat  dosyasını çalıştırdım.  (ilk harfi h sizinki gibi) aldığım sonuç aşağıda

 

 


C:\Windows\system32>cd /d "G:\EFI\Microsoft\Boot\"
Sistem belirtilen sürücüyü bulamıyor.

C:\Windows\system32>rem >> edit menu Windows 7-8-10 Kurulumu Uefi

C:\Windows\system32>set "bootfile=\boot\bootiso64.wim"

C:\Windows\system32>set "identifier={default}"

C:\Windows\system32>bcdedit /store bcd /set {default} device ramdisk=[h:]\boot\bootiso64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {default} osdevice ramdisk=[h:]\boot\bootiso64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win10PE SE From Dlc Uefi

C:\Windows\system32>set "bootfile=\DLC1\W10PE\W10x64.wim"

C:\Windows\system32>set "identifier={6e700c3b-7cca-4b2b-bca6-5a486db4b4ec}"

C:\Windows\system32>bcdedit /store bcd /set {6e700c3b-7cca-4b2b-bca6-5a486db4b4ec} device ramdisk=[h:]\DLC1\W10PE\W10x64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {6e700c3b-7cca-4b2b-bca6-5a486db4b4ec} osdevice ramdisk=[h:]\DLC1\W10PE\W10x64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win8.1PE Uefi From Koylu

C:\Windows\system32>set "bootfile=\boot\win8.1pex64.wim"

C:\Windows\system32>set "identifier={1584ef96-c13d-4ee2-b1b1-8fce4a0834a1}"

C:\Windows\system32>bcdedit /store bcd /set {1584ef96-c13d-4ee2-b1b1-8fce4a0834a1} device ramdisk=[h:]\boot\win8.1pex64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {1584ef96-c13d-4ee2-b1b1-8fce4a0834a1} osdevice ramdisk=[h:]\boot\win8.1pex64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win7pe64 Uefi From Koylu

C:\Windows\system32>set "bootfile=\boot\win7pe64.wim"

C:\Windows\system32>set "identifier={ebb0ef9d-19d7-47a6-8f0a-ec37ffa958fb}"

C:\Windows\system32>bcdedit /store bcd /set {ebb0ef9d-19d7-47a6-8f0a-ec37ffa958fb} device ramdisk=[h:]\boot\win7pe64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {ebb0ef9d-19d7-47a6-8f0a-ec37ffa958fb} osdevice ramdisk=[h:]\boot\win7pe64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Acronis True Image 2017

C:\Windows\system32>set "bootfile=\boot\Acronis.wim"

C:\Windows\system32>set "identifier={d314f67b-45b3-4dac-b244-46a733f2583c}"

C:\Windows\system32>bcdedit /store bcd /set {d314f67b-45b3-4dac-b244-46a733f2583c} device ramdisk=[h:]\boot\Acronis.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {d314f67b-45b3-4dac-b244-46a733f2583c} osdevice ramdisk=[h:]\boot\Acronis.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win10 pe Uefi From SSTR

C:\Windows\system32>set "bootfile=\SSTR\strelec10x64Eng.wim"

C:\Windows\system32>set "identifier={e72b0465-e063-4b8b-8dc8-694b55012f0b}"

C:\Windows\system32>bcdedit /store bcd /set {e72b0465-e063-4b8b-8dc8-694b55012f0b} device ramdisk=[h:]\SSTR\strelec10x64Eng.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {e72b0465-e063-4b8b-8dc8-694b55012f0b} osdevice ramdisk=[h:]\SSTR\strelec10x64Eng.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win10PE Uefi From Koylu

C:\Windows\system32>set "bootfile=\BOOT\win1064pe.wim"

C:\Windows\system32>set "identifier={e99edec5-fad0-48b2-8a0b-1bccf29ea1ba}"

C:\Windows\system32>bcdedit /store bcd /set {e99edec5-fad0-48b2-8a0b-1bccf29ea1ba} device ramdisk=[h:]\BOOT\win1064pe.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {e99edec5-fad0-48b2-8a0b-1bccf29ea1ba} osdevice ramdisk=[h:]\BOOT\win1064pe.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>pause
Press any key to continue . . .

 

aynı cevap senin içinde gecerli

Edited by köylü
Link to comment
Share on other sites

Bir saat önce, naturel yazdı:

köylü hocam elinize sağlık. 

doğru mu anlamışım acaba 

-ilk tib dosyasını indirdim

-ilk tib dosyasına uygun patch   indirdim çalıştırdım.

-oluşturulan yeni tib dosyası imajını belleğime yükledim.

- daha sonra bcdautoset.bat  dosyasını çalıştırdım.  (ilk harfi h sizinki gibi) aldığım sonuç aşağıda

 

 


C:\Windows\system32>cd /d "G:\EFI\Microsoft\Boot\"
Sistem belirtilen sürücüyü bulamıyor.

C:\Windows\system32>rem >> edit menu Windows 7-8-10 Kurulumu Uefi

C:\Windows\system32>set "bootfile=\boot\bootiso64.wim"

C:\Windows\system32>set "identifier={default}"

C:\Windows\system32>bcdedit /store bcd /set {default} device ramdisk=[h:]\boot\bootiso64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {default} osdevice ramdisk=[h:]\boot\bootiso64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win10PE SE From Dlc Uefi

C:\Windows\system32>set "bootfile=\DLC1\W10PE\W10x64.wim"

C:\Windows\system32>set "identifier={6e700c3b-7cca-4b2b-bca6-5a486db4b4ec}"

C:\Windows\system32>bcdedit /store bcd /set {6e700c3b-7cca-4b2b-bca6-5a486db4b4ec} device ramdisk=[h:]\DLC1\W10PE\W10x64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {6e700c3b-7cca-4b2b-bca6-5a486db4b4ec} osdevice ramdisk=[h:]\DLC1\W10PE\W10x64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win8.1PE Uefi From Koylu

C:\Windows\system32>set "bootfile=\boot\win8.1pex64.wim"

C:\Windows\system32>set "identifier={1584ef96-c13d-4ee2-b1b1-8fce4a0834a1}"

C:\Windows\system32>bcdedit /store bcd /set {1584ef96-c13d-4ee2-b1b1-8fce4a0834a1} device ramdisk=[h:]\boot\win8.1pex64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {1584ef96-c13d-4ee2-b1b1-8fce4a0834a1} osdevice ramdisk=[h:]\boot\win8.1pex64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win7pe64 Uefi From Koylu

C:\Windows\system32>set "bootfile=\boot\win7pe64.wim"

C:\Windows\system32>set "identifier={ebb0ef9d-19d7-47a6-8f0a-ec37ffa958fb}"

C:\Windows\system32>bcdedit /store bcd /set {ebb0ef9d-19d7-47a6-8f0a-ec37ffa958fb} device ramdisk=[h:]\boot\win7pe64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {ebb0ef9d-19d7-47a6-8f0a-ec37ffa958fb} osdevice ramdisk=[h:]\boot\win7pe64.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Acronis True Image 2017

C:\Windows\system32>set "bootfile=\boot\Acronis.wim"

C:\Windows\system32>set "identifier={d314f67b-45b3-4dac-b244-46a733f2583c}"

C:\Windows\system32>bcdedit /store bcd /set {d314f67b-45b3-4dac-b244-46a733f2583c} device ramdisk=[h:]\boot\Acronis.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {d314f67b-45b3-4dac-b244-46a733f2583c} osdevice ramdisk=[h:]\boot\Acronis.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win10 pe Uefi From SSTR

C:\Windows\system32>set "bootfile=\SSTR\strelec10x64Eng.wim"

C:\Windows\system32>set "identifier={e72b0465-e063-4b8b-8dc8-694b55012f0b}"

C:\Windows\system32>bcdedit /store bcd /set {e72b0465-e063-4b8b-8dc8-694b55012f0b} device ramdisk=[h:]\SSTR\strelec10x64Eng.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {e72b0465-e063-4b8b-8dc8-694b55012f0b} osdevice ramdisk=[h:]\SSTR\strelec10x64Eng.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>rem >> edit menu Win10PE Uefi From Koylu

C:\Windows\system32>set "bootfile=\BOOT\win1064pe.wim"

C:\Windows\system32>set "identifier={e99edec5-fad0-48b2-8a0b-1bccf29ea1ba}"

C:\Windows\system32>bcdedit /store bcd /set {e99edec5-fad0-48b2-8a0b-1bccf29ea1ba} device ramdisk=[h:]\BOOT\win1064pe.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>bcdedit /store bcd /set {e99edec5-fad0-48b2-8a0b-1bccf29ea1ba} osdevice ramdisk=[h:]\BOOT\win1064pe.wim,{7619dcc8-fafe-11d9-b411-000476eba25f}
The boot configuration data store could not be opened.
Sistem belirtilen dosyayı bulamıyor.

C:\Windows\system32>pause
Press any key to continue . . .

 

@naturel

bootice ile UEFI partition kısmını aktif edin ve bootice hangi sürücü harfini atamış ise *.bat dosyasına o harfi girin...bu konuda daha önce video çekmiştim,aşağıdaki linkten videoyu indirip inceleyin

 

 

  • Like 1
Link to comment
Share on other sites

  • Editor
10 saat önce, imajeplus yazdı:

köylü hocam 

karadurak hocamın multibotta yazdıgınız  multibota renkli windows  boot manageri entegre edebilirmiyiz.Uefi kısmına ekleme yaptım çalıştıramadım yardımcı olurmusunuz.

nasıl bir hata alıyorsun bcd dosyası senin partitiona göre düzenlenmesi lazım düzenledinmi?

Link to comment
Share on other sites

10 saat önce, köylü yazdı:

nasıl bir hata alıyorsun bcd dosyası senin partitiona göre düzenlenmesi lazım düzenledinmi?

köylü hocam sizin hazırlamış oldugunuz multibootun  uefi kısmını renkli windows boot manager yapmak istiyorum.Bcd dosyasınıda düzenledim.Partitiona göre fakat orjinal ekran geliyor.Bunu secure boot aktifken yapıyorum.Bcd dosyam aşagıdaki şekilde.resimdeki osd guid degeri aynı yalnız resim benim pcye ait degil.başka degiştirmem gereken bişey varmı.

image.jpeg 

Edited by imajeplus
Link to comment
Share on other sites

köylü hocam ilginç bir durum ki sistemi taşınabilir hdd de sorunsuz yapıyorum lakin kingston 32gb 3.0 usb bellek te denediğim de arkadaşlar da ki harf atama sorunu bunda da yapıyor ve herşey sorunsuz görünüyor dediğim gibi hdd de sorun yok tib den backup yaptığım da uefi bölümü gizli olmadan geliyor ve bat dosyası sorunsuz işlemi yapıyor sonrasında test ediyorum hata yok ancak usb bellek te bootice ile söylediğiniz işlemleri yaptım olmadı partition wizard ile uefi bölümünü unhide yaptım harf atadım apply yaptıktan sonra harf yok bir tutarsızlık var ama çözemedim ben de usb hdd yi kullanayım dedim

 

Edited by oktay x
Link to comment
Share on other sites

  • Editor
13 saat önce, imajeplus yazdı:

köylü hocam sizin hazırlamış oldugunuz multibootun  uefi kısmını renkli windows boot manager yapmak istiyorum.Bcd dosyasınıda düzenledim.Partitiona göre fakat orjinal ekran geliyor.Bunu secure boot aktifken yapıyorum.Bcd dosyam aşagıdaki şekilde.resimdeki osd guid degeri aynı yalnız resim benim pcye ait degil.başka degiştirmem gereken bişey varmı.

image.jpeg 

problem yoksa açılıyorsa sorun yok secureboot açıkken orjnal ekran gelir securebootu kapatarak denersen renkli ekran gelir

 

11 saat önce, oktay x yazdı:

köylü hocam ilginç bir durum ki sistemi taşınabilir hdd de sorunsuz yapıyorum lakin kingston 32gb 3.0 usb bellek te denediğim de arkadaşlar da ki harf atama sorunu bunda da yapıyor ve herşey sorunsuz görünüyor dediğim gibi hdd de sorun yok tib den backup yaptığım da uefi bölümü gizli olmadan geliyor ve bat dosyası sorunsuz işlemi yapıyor sonrasında test ediyorum hata yok ancak usb bellek te bootice ile söylediğiniz işlemleri yaptım olmadı partition wizard ile uefi bölümünü unhide yaptım harf atadım apply yaptıktan sonra harf yok bir tutarsızlık var ama çözemedim ben de usb hdd yi kullanayım dedim

 

burada harfin bir önemi yok aslında ben gizlemeden yedeğini almıştım uefi bölümünün bazı usb lerde gizli geliyor manuel olarak yapılması gereken bir şekilde uefi bölümü açığa çıkartılarak bootice programı ile harfe bakmaksızın içerindeki bcd dosyasının disk ve partition kısımlarını usb nin ilk bölümünü yazmaktır ve her menüyü tek tek kaydetmektir

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...