Jump to content
Son zamanlarda artan kullanıcı hesap hırsızlıkları sebebiyle tüm kullanıcılara şifre sıfırlama maili gönderilmiştir. Lütfen güveli şifreler seçiniz. ×

Disk Yönetimi Hakkında; Sürücü Görünmüyor


travegonaci
 Share

Recommended Posts

Konu Emin'im vardır başlık olarak ve d sürücüsünü "yönet-Disk yönetimi-harf yolu atama" yoluyla d sürücüsü "Bilgisayarım" altında görüntülemek mümkün ancak benim yaşadığım problem bundan sonra başladı. Normal yolla yani "bilgisayarım-yönet-sürücü harf yolu değiştir" yoluyla harf atadığım ve "Disk yönetimi"nede atadığım harf görünmesine rağmen "Bilgisayarım" içine girdiğimde c sürücü görünmesine rağmen d sürücüsünü göremiyorum. Ortak ağ üzerindeki diğer kullanıcılardan giriş yaptığımda (D:) sürücüsü görüntülenebilirken ağa tabi olan bilgisayar atanmış kendi kullanıcımla giriş yaptığımda d sürücüsünü göremiyorum. Adminden girdiğimde d sürücüsü yine görülebiliyorken , Kendi kullanıcı adım ve şifremle girdiğimizde d sürücüsü görünmüyor. 

D sürücüsü, diğer kullanıcılardan  kullanıcıdan giriş yaptığımda (Yeni birim (D:) ) olarak, C sürücüsü de (C:) olarak görülüyor.

ekran görüntüleri ekte

konuyu çözmek adına yardımcı olabilir misiniz mümkünse. 

IMG_1826.JPG

IMG_1825.JPG

Edited by travegonaci
Görsel yükleme
Link to comment
Share on other sites

7 dakika önce, travegonaci yazdı:

HD yi mi değiştireyim yani anlamadım 

Diskte sorun olacağını sanmam,yapılandırma ile ilgili bir soruna benziyor,öncelikli olarak temizlik yaparak denemek gerekli önbellek,hard-diskönbellekleri vb.zamanla tepkisel durumları yavaşlattığından ötürü önerdim.Ccleaner,advancedsystemcare ve benzer programları kullanabilirsiniz üst ekte verdiğim linkteki Gst ile de temizlik yapabilirsiniz.

Muhtemel çözümler?

1.Yeni yönetici hesabı oluşturarak administrator yönetici hakları vererek 2.hesaba geçerekte deneyin

2.Virus programları ile tarama yapın

3.Başlat çalıştır üzerinden yada CMD komut satırı üzerinden CHKDSK komutunu deneyerekte harddisk onarma işlemleride işe yarayabilir.

4.Başlat çalıştır msconfig,başlangıç uygulamalarını tümünü iptal ederek, uygula tamamı tuşlatıp,sistemi yeniden başlatıp deneyin.

5.Son çare olarak Disklerde önemli veriler varsa yedekleyip!,tüm diskleri formatlayarak sistemi yeniden kurun.

kolay gelsin.

  • Like 1
Link to comment
Share on other sites

Benim anladığım D sürücüsü

Sağlam ( birincil bölüm ) olarak görünüyor ama normalde Sağlam ( mantıksal sürücü ) olarak görünmesi lazım

Bence partition programı ile bakman lazım MiniTool Partition Wizard programını indir bir bak

 

Link to comment
Share on other sites

7 dakika önce, G)-(OST yazdı:

Benim anladığım D sürücüsü

Sağlam ( birincil bölüm ) olarak görünüyor ama normalde Sağlam ( mantıksal sürücü ) olarak görünmesi lazım

Bence partition programı ile bakman lazım MiniTool Partition Wizard programını indir bir bak

 

Yok o normaldir. Benim tüm disklerim ve tüm bölümlerim Primary ama şimdiye kadar sadece 2 gün önceki format öncesi harici HDD ile yaşadım onda da USB yerine oturmamış.

Bir ara aynı sorunu USB ile yaşamıştım. Kullandığım taktirde kendi düzelmişti.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Content

    • By qxqx
      Calibre v6.4.0 x64 bit Multilingual

      Calibre v6.4.0 x64 bit Multilingual
      Calibre, her türlü kitap hakkında büyük miktarda bilgi depolayan oldukça etkileyici bir veritabanına sahiptir. Diyelim ki yayın yazarını öğrenebilir, hangi yılda yayınlandığını, kitabı kimin yayınladığını, kapağını ve etiketlerini görebilir, genel olarak, yukarıda açıklandığı gibi, bilgilerin mümkün olduğunca eksiksiz olduğunu varsayalım. Calibreyi başlatarak ve kendi kitabınızı ekleyerek, özel bir yerleşik kütüphaneye yerleştirilecek, daha sonra ilgili tüm bilgiler veritabanına eklenecek, bu adım tamamlanamazsa, geliştirme ISBN sunucularına bağlanabilir ve kitap hakkında gerekli bilgileri oradan indirebilir.

      Effortlessly keep your e-book library thoroughly organized with the help of this efficient and straightforward software solution.

      Calibre is an e-book library management application. It is free, open source and cross-platform in design and works on Linux, OSX and Windows.Calibre is meant to be a complete e-library solution and thus includes, library management, format conversion, news feeds to ebook conversion as well as e-book reader sync features.

      Calibre is an application that allows you to view, convert and organize e-books in a simple manner.
      The user interface of the program is simple to use. You can add e-books (from a single or multiple directories) by using the file browser or the "drag and drop" function. You can also add books by entering their ISBN code.

      In the tag browser you can sort e-books according to their author, language, series, format, publisher, rating, as well as news, tags and identifies.

      So, you can or edit metadata individually or in bulk, get covers, merge e-book records, convert e-books individually or in bulk (in the XML, CSV, EPUB, MOBI and other formata), as well as send e-books to devices.

      You can also use the "Fetch news" feature to news from websites and convert them into a preferred e-book format. It is possible to schedule news s, add a custom sources or all scheduled news sources as well.

      Calibre allows you to create libraries and toggle between them, as well as rename, delete, backup and restore libraries, connect to iTunes, start a content server, search and sort e-books, and more.

      The program uses a high amount of system resources and contains a comprehensive help file. It didn't freeze or crash during our tests. Calibre is easy to use and provides a great solution for viewing and organizing e-books in various formats.

      Supported Operating Systems: Windows XP, Windows Vista, Windows 7, 8, 8.1, 10 (32-bit, 64-bit).
       
      TEAM-Full
      Calibre v6.4.0 x64 bit Multilingual TEAM-Full.exe (126.46 MB)
    • By qxqx
      USB Low-Level Format Pro v5.01

      USB Low-Level Format Pro v5.01
      32bit | 64bit
      Low-level formatting is a process of disk formatting operation that restores disk drive to its factory defaults. USB drive, USB flash drive, USB pen drive, and USB thumb are easy to use for data transfer, however, the various usages simultaneously lead to multiple issues. For instance, a USB flash pen drive may contain less capacity than its original state for unknown reasons; the flash device might have less capacity after it is cloned as a USB bootable drive from an ISO file. In other cases, the USB drive might lose capacity after it is formatted on yet a different device, such as a smart TV or a wireless router.

      In case you experience constant data corruption, virus intrusion, invalid Master Boot Record, hidden partition, corrupted bootable sector, or bad sectors flags in USB storage device firmware/controller, the software can reliably revitalize your malfunctioning USB drive.
      USB Low-Level Format is software that performs zero-fills for USB storage devices and simulate the finishing process as done in the factory. USB Low-level Format software clears all flags, all data, and all settings in USB drives. The software analyzes the possible settings for USB drive, figuring out the physical storage capacity, talking to the firmware/controller of your USB drive, and writing a zero byte to its each and every location on the drive. The process of low-level formatting is slow, as the software thoroughly and irreversibly erases all data from USB storage devices followed by restore USB drives to original state to find back the lost capacity and make them back to normal. The software can be used as a USB disk mass production tool to restore USB to factory default settings through low-level formatting, as it supports more than 20 USB drive controller brands, such as Intel, Samsung, Micron, Phison, SMI, Marvell, Toshiba, Silicon Motion, PMC, Sierra, OCZ, JMicron, Maxiotek, Goke, Greenliant, Fusion-io, Realtek, SanDisk, Western Digital, Hyperstone, Novachips, VIA, FADU.
      In addition to low-level format capability, the software features more; it allows to create bootable USB drive for Windows installation, create bootable USB drive for MSDOS, FreeDOS, Unix, Linux, WinPE (Windows PE), and WinRE (Windows Recovery Environment). It offers 9 industrial-strength data wipe options that securely wipe data on USB drives. It supports initialization of USB drives of any capacity to popular file systems, such as NTFS, FAT32, FAT, and exFAT.
       
      Features in Pro-version:
      1. Support USB storage device up to 256 TB.
      2. Low-Level format USB flash drive not recognized by Windows.
      3. Create a FAT volume larger than 32 GB in a split second.
      4. Optimize USB flash drive for read/write speed.
      5. Restore USB drive back to full capacity.
       
      What’s New:
      • Format USB drives with corrupted partition tables and invalid sector size
      • Support new USB flash drives with SanDisk USB storage controllers
      • Much faster quick format operation
      • Fix a bug in calling FormatEx2() API on Windows 10 64-bit and 32-bit
       
      Operating System:
      – Windows 11, 10, 8.1, 8, 7, Vista, XP, 2000, Server 2022/2019/2016/2012/2008/2003/2000 (32bit/64bit)
      Homepage: https://www.bureausoft.com/
      3.47 MB
      TEAM-Full
    • By artae
      File Size : 1.9 Mb

      Disk Storage Low Level Format software is a software application that does Low Level Format like what is done in factory.

      The software not only performs zero-fills to the storage device, but also restore the storage device to full capacity. The software allows you to revitalize your infected or corrupted hard drive by hiding the bad sectors in order to create a clean and error-free surface for your data. All the visible and invisible data to the operating systems are fully and irreversibly erased from the storage devices.
      The software supports all types of storage devices connected to the computer, regardless of their interface (SATA, IDE, SCSI and USB), and it provides details of the selected device such as device name, device model, firmware revision, serial number, device ID, bus type, LBA (logical block addressing) and total capacity.
      You may have the program perform only a quick wipe, which only removes the partitions, erases the partition table, delete the active partition flag, MBR (Master Boot Record - the boot sector located at the very bning of partitioned storage devices) and all other data on a storage device. In addition to LLF (Low Level Format), the software features Quick Format and Standard Format. The two Format features allow you to format storage devices not recognized by Windows, be it a corrupted one or a logically broken one. A fascinating feature is boot disk creation; the software helps you create bootable USB drive or bootable hard drive after the formatting operation. You can boot to MSDOS, FreeDOS, or Windows operating systems with your storage device after a few clicks. The software is portable and it can be stored on a flash drive or any other external storage devices.
      The software works with a broad range of storage devices, including HDD (Hard Disk Drive), SSD (Solid State Drive), and USB drives (USB flash drive, USB thumb drive, and USB portable drive). It supports most hard disk manufacturers such as Western Digital, Seagate, Hitachi, IBM, Toshiba, Maxtor, Samsung, and Quantum. For USB storage devices, the software supports virtually all the controller brands, such as Intel, Samsung, Micron, Phison, SMI, Marvell, Toshiba, Silicon Motion, PMC, Sierra, OCZ, JMicron, Maxiotek, Goke, Greenliant, Fusion-io, Realtek, SanDisk, Western Digital, Hyperstone, Novachips, and Lenovo.
      Features of Disk Storage Low Level Format software
      Low Level Format
      Secure Format with strong data wipe algorithms
      Quick Format in a split second
      Slow Format
      Adjust sector size from 512 bytes to 32MB
      Support NTFS, FAT16, FAT32, and ExFAT file systems
      Recognize UDF, HFS+, ReFS, NTFS, FAT16, FAT32, ExFAT file systems
      Scan storage device for common errors before formatting a drive
      Show serial number of storage device
      Create startup disk for MS-DOS, FreeDOS, and Windows
      Support FAT32 partition larger than 32GB
      Repair corrupted USB drives and fix common issues with hard disks
      Support Microsoft Windows 11/10/8/7/Vista/XP/2003/2008/2012/2016/2019/2021 (32-bit and 64-bit)
      Whats New
      Low Level Format now supports external USB drives and HP portable drives.
      Show serial number of hard drives and USB flash drives
      Support corrupted USB drives with NTFS and EXFAT file systems
      DOWNLOAD
      (Buy premium account for maximum speed and resuming ability)


      https://nitroflare.com/view/F64106D8A26CD65/d6euy.Disk.Storage.Low.Level.Format.7.0.rar



      https://rapidgator.net/file/686ee432c0aed68cae3a6458ec1a59c9/d6euy.Disk.Storage.Low.Level.Format.7.0.rar


    • By artae
      File size: 7.38 MB

      Disk Storage Low Level Format software is a software application that does Low Level Format like what is done in factory.

      The software not only performs zero-fills to the storage device, but also restore the storage device to full capacity. The software allows you to revitalize your infected or corrupted hard drive by hiding the bad sectors in order to create a clean and error-free surface for your data. All the visible and invisible data to the operating systems are fully and irreversibly erased from the storage devices.
      The software supports all types of storage devices connected to the computer, regardless of their interface (SATA, IDE, SCSI and USB), and it provides details of the selected device such as device name, device model, firmware revision, serial number, device ID, bus type, LBA (logical block addressing) and total capacity.
      You may have the program perform only a quick wipe, which only removes the partitions, erases the partition table, delete the active partition flag, MBR (Master Boot Record - the boot sector located at the very bning of partitioned storage devices) and all other data on a storage device. In addition to LLF (Low Level Format), the software features Quick Format and Standard Format. The two Format features allow you to format storage devices not recognized by Windows, be it a corrupted one or a logically broken one. A fascinating feature is boot disk creation; the software helps you create bootable USB drive or bootable hard drive after the formatting operation. You can boot to MSDOS, FreeDOS, or Windows operating systems with your storage device after a few clicks. The software is portable and it can be stored on a flash drive or any other external storage devices.
      The software works with a broad range of storage devices, including HDD (Hard Disk Drive), SSD (Solid State Drive), and USB drives (USB flash drive, USB thumb drive, and USB portable drive). It supports most hard disk manufacturers such as Western Digital, Seagate, Hitachi, IBM, Toshiba, Maxtor, Samsung, and Quantum. For USB storage devices, the software supports virtually all the controller brands, such as Intel, Samsung, Micron, Phison, SMI, Marvell, Toshiba, Silicon Motion, PMC, Sierra, OCZ, JMicron, Maxiotek, Goke, Greenliant, Fusion-io, Realtek, SanDisk, Western Digital, Hyperstone, Novachips, and Lenovo.
      Features of Disk Storage Low Level Format software
      Low Level Format
      Secure Format with strong data wipe algorithms
      Quick Format in a split second
      Slow Format
      Adjust sector size from 512 bytes to 32MB
      Support NTFS, FAT16, FAT32, and ExFAT file systems
      Recognize UDF, HFS+, ReFS, NTFS, FAT16, FAT32, ExFAT file systems
      Scan storage device for common errors before formatting a drive
      Show serial number of storage device
      Create startup disk for MS-DOS, FreeDOS, and Windows
      Support FAT32 partition larger than 32GB
      Repair corrupted USB drives and fix common issues with hard disks
      Features in Pro version
      1. Support storage device up to 256 TB.
      2. Low-Level format disk/drive not recognized by Windows.
      3. Create a FAT32 volume larger than 32 GB in a split second.
      4. Optimize storage device for read/write speed.
      5. Restore disk/drive back to full capacity.
      Whats New
      Low Level Format now supports external USB drives and HP portable drives.
      Show serial number of hard drives and USB flash drives
      Support corrupted USB drives with NTFS and EXFAT file systems
      Support Microsoft Windows 11/10/8/7/Vista/XP/2003/2008/2012/2016/2019/2021 (32-bit and 64-bit)
      DOWNLOAD
      (Buy premium account for maximum speed and resuming ability)


      https://nitroflare.com/view/CC607856442515B/1itg6.Disk.Storage.Low.Level.Format.Pro.7.0.rar



      https://rapidgator.net/file/b269655f457f26f1ba47b83437b779d8/1itg6.Disk.Storage.Low.Level.Format.Pro.7.0.rar


    • By artae
      Disk Storage Low Level Format Pro v7.0 | File size: 7.38 MB

      Disk Storage Low Level Format software is a software application that does Low Level Format like what is done in factory. The software not only performs zero-fills to the storage device, but also restore the storage device to full capacity. The software allows you to revitalize your infected or corrupted hard drive by hiding the bad sectors in order to create a clean and error-free surface for your data. All the visible and invisible data to the operating systems are fully and irreversibly erased from the storage devices.

      The software supports all types of storage devices connected to the computer, regardless of their interface (SATA, IDE, SCSI and USB), and it provides details of the selected device such as device name, device model, firmware revision, serial number, device ID, bus type, LBA (logical block addressing) and total capacity.

      You may have the program perform only a quick wipe, which only removes the partitions, erases the partition table, delete the active partition flag, MBR (Master Boot Record - the boot sector located at the very beginning of partitioned storage devices) and all other data on a storage device. In addition to LLF (Low Level Format), the software features Quick Format and Standard Format. The two Format features allow you to format storage devices not recognized by Windows, be it a corrupted one or a logically broken one. A fascinating feature is boot disk creation; the software helps you create bootable USB drive or bootable hard drive after the formatting operation. You can boot to MSDOS, FreeDOS, or Windows operating systems with your storage device after a few clicks. The software is portable and it can be stored on a flash drive or any other external storage devices.

      The software works with a broad range of storage devices, including HDD (Hard Disk Drive), SSD (Solid State Drive), and USB drives (USB flash drive, USB thumb drive, and USB portable drive). It supports most hard disk manufacturers such as Western Digital, Seagate, Hitachi, IBM, Toshiba, Maxtor, Samsung, and Quantum. For USB storage devices, the software supports virtually all the controller brands, such as Intel, Samsung, Micron, Phison, SMI, Marvell, Toshiba, Silicon Motion, PMC, Sierra, OCZ, JMicron, Maxiotek, Goke, Greenliant, Fusion-io, Realtek, SanDisk, Western Digital, Hyperstone, Novachips, and Lenovo.

      Features of Disk Storage Low Level Format software
      Low Level Format
      Secure Format with strong data wipe algorithms
      Quick Format in a split second
      Slow Format
      Adjust sector size from 512 bytes to 32MB
      Support NTFS, FAT16, FAT32, and ExFAT file systems
      Recognize UDF, HFS+, ReFS, NTFS, FAT16, FAT32, ExFAT file systems
      Scan storage device for common errors before formatting a drive
      Show serial number of storage device
      Create startup disk for MS-DOS, FreeDOS, and Windows
      Support FAT32 partition larger than 32GB
      Repair corrupted USB drives and fix common issues with hard disks

      Features in Pro version
      1. Support storage device up to 256 TB.
      2. Low-Level format disk/drive not recognized by Windows.
      3. Create a FAT32 volume larger than 32 GB in a split second.
      4. Optimize storage device for read/write speed.
      5. Restore disk/drive back to full capacity.

      Whats New
      Low Level Format now supports external USB drives and HP portable drives.
      Show serial number of hard drives and USB flash drives
      Support corrupted USB drives with NTFS and EXFAT file systems

      Support Microsoft Windows 11/10/8/7/Vista/XP/2003/2008/2012/2016/2019/2021 (32-bit and 64-bit)

      Homepage
      https://www.go2pdf.com/
      DOWNLOAD
      (Buy premium account for maximum speed and resuming ability)


      https://nitroflare.com/view/A68DFF216F68709/97uu9.Disk.Storage.Low.Level.Format.Pro.v7.0.rar



      https://rapidgator.net/file/8164cde8025d1e7ce2ff86071c4709e6/97uu9.Disk.Storage.Low.Level.Format.Pro.v7.0.rar


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...