Jump to content

Cdxtract Samplit V1.3


HoT_JaZz
 Share

Recommended Posts

samplitwork.jpg

tr.png

Ses örneklerini deneyen ve midi aletleri dönüştüren bir proğramdır. Klavyeden alacağınız sesleri düzenlemek ve geliştirmek için kullanbilirsiniz.

CDXtract Samplit yeni bir çözümdür, midiniz kaydedip dönüştürmek için alet sağlar, örnekleri deneyene imkanı verir. Donanımın heri bireysel olarak kaydettiği midi sesi çıkarıp örnekleri denemenizi ve kendi istedikleriniz ile yaptıklarınızdan da kullanılması için ses hazırlamanıza yardımcı olan samplit midiye notları gönderir. Biraz fare tıklamaları ile kulşanabileceğiniz basit bir arayüzü vardır.. Samplit ayrıca gerçek insan sesi özel etki gürültü olarak midifiedin ses çıkardığı tonu ve bunun gibileri de kaydedebilir. Samplit machfive standart kütüphanede piyanonun içerdiği sesleri bünyesinde bulundurur ve kaydeder. tanım ferrocan.....

uk.png

Converts MIDI instruments to sampler instruments

Samplit is a new solution for recording and converting your MIDI instruments to sampler instruments. Samplit sends the midi notes to the midi hardware, records all the individual sounds and create ready-to-play Sampler instruments with a few mouse clicks. Samplit can also be used to record non-MIDIfied sounds such as real instrument, human voice, special effects, noise, etc. Samplit has already been used to record the Bösendorfer piano included in the MOTU MachFive standard library.

.

.

Quality: SAMPLIT uses the ASIO driver on PC and the CoreAudio driver on MAC.

Supported sampling rates: 44.1, 48, 96 kHz (depending on your audio card)

Supported bit resolutions: 16, 24, 32 bits (depending on your audio card)

You can always convert to a lower sample rate and bit resolution. For example you can record a piano in 96/24 and create a nice 96/24 piano in Kontakt format and a lighter 44/16 piano in soundfont format. All the operations on samples are non destructives

Interface: The main window gives you a clear view of your current project. Anything that you do has an immediate visual impact. You can add or remove a velocity, select or deselect a note, listen to any sample, erase a sample that you don't like

Recording: With SAMPLIT, you are in control. The recording window allows you adjust all the recording parameters in real time: thresholds, pre-recording, post-recording, recording limit, recording pause... You can also decide if you want to record by velocity or by note

recording.jpg

Advanced looping: SAMPLIT can automatically loop your samples using a sophisticated looping algorithm designed to preserve the musicality of your sounds. The picture below shows a complex orchestra string sound that has been perfectly looped. See how the loop points have been set where the waveform is similar. In this case there is almost 2 seconds between the 2 points. You can even record any kind of music and SAMPLIT will be able to create interesting music loops

autoloop.jpg

Integrated player: SAMPLIT includes a simple player to test your recorded programs. You can adjust some parameters like the VCA attack and release. You can also adjust the level of compression and normalization to apply to the samples. Once you are satisfied with the results, you can then convert to your favorite sampler format. The player is also usefull to see how a new instrument will sound even if you have not finished recording all the samples. This player streams everything from disk, therefore there is no loading time

player.jpg

Midi: Every program inside a project records the bank change program change and control change. When you select that program, all these midi parameters are sent back to your midi synth like a total recall. But you don't need a midi interface to use SAMPLIT, you can also record any kind of non-midified sounds: real instruments, human voice, special effects, animals..

Instrument design: SAMPLIT can record several instruments and combine them with Key switch, Control switch and Crossfade. For example you can record 5 different piano sounds from your midi keyboard, combine them in one new Halion instrument and use the modwheel to switch from one piano sound to another.

SAMPLIT has been used to record the famous Bosendorfer piano included in the MOTU MachFive standard library. The recording was done in 96KHz/24 bits using a Digi9632 audio card from RME and an Apogee converter

piano.jpg

session.jpg

Download:

ttp://rapidshare.com/files/97101175/CDXtract_Samplit_v1.3_ferrocan.rar[/CODE]

[/center]

Link to comment
Share on other sites

  • 4 years yıl...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...