-
Similar Content
-
By freekays
PowerIso ile eklendi
Microsoft MSDN orjinal Multi Lang
Win10_22H2_Turkish_x64.iso
is derlemesi 19045.2486 kalıbıdır
Format esnasında Diski görmeyenler sürücü yükle >> Gözat
DOWNLOAD
Windows 10 TR x64
Stroage Driver lı Windows 10 iso
Boyut: 5,37 GB
altı üstü 1 mb lık iki sys dosyası atacaksınız uğraş dur şimdi ara bul işin yoksa
ne biçim iş bu konu nasıl atlanır sadece driver linkleri
Download - MEGA (⚡Tnc Debrid ile İndir)
-
By qxqx
CrystalDiskInfo v8.17.6 Multilingual
CrystalDiskInfo v8.17.6 Multilingual
CrystalDiskInfo – is a small utility to monitor the status of hard drives, monitors the status of hard drives that support SMART technology Monitors and provides an overall assessment of “health” of your drive. Also displays detailed information about the hard drives installed in your computer (flash, serial number, a standard interface, the total time, etc.), and also displays the attributes of the parameters of SMART self-test (read errors, performance, start / stop spindle, seek time, the number of on-off cycles, errors and many other sectors). CrystalDiskInfo is a HDD / SSD utility which support SMART (Self-Monitoring, Analysis, and Reporting Technology).
This includes such details as current drive temperature, firmware version, number of failed read or write attempts, how long the drive has been running and how often it’s been started and stopped, and so on. As various factors approach thresholds of danger, CrystalDiskInfo will alert you, letting you know it’s time to make backups while you still can.
With CrystalDiskInfo, you can view detailed information about the drives installed in the computer, and See also a list of parameters of the SMART self-diagnosis system The program supports localizations, as well as changeable themes. In addition, the utility dynamically tracks changes settings for all drives in the system and allows you to display it’s on the chart. There is support for external drives with USB and IEEE 1394 interfaces. Full list of supported chips and controllers can be found on the official website (more). The ability to manage AAM and APM for external devices is also implemented.
Key features:
– Show S.M.A.R.T Information
– Show HDD Information
– Change dialog design
– Internationalization
– Support for external USB drives.
– Health and temperature monitoring.
– Warning about problems with hard drives.
– Display AAM/APM information.
– And much more…
What’s New:
– https://crystalmark.info/en/software/crystaldiskinfo/crystaldiskinfo-history/
System Requirements:
– Windows Vista / 7 / 8 / 8.1 / 10 / 11 / Servers
Homepage: https://crystalmark.info/
TEAM-Full
CrystalDisk v8.17.6 Multilingual TEAM-Full.exe (6.6 MB)
-
By artae
File Size : 1.9 Mb
Disk Storage Low Level Format software is a software application that does Low Level Format like what is done in factory.
The software not only performs zero-fills to the storage device, but also restore the storage device to full capacity. The software allows you to revitalize your infected or corrupted hard drive by hiding the bad sectors in order to create a clean and error-free surface for your data. All the visible and invisible data to the operating systems are fully and irreversibly erased from the storage devices.
The software supports all types of storage devices connected to the computer, regardless of their interface (SATA, IDE, SCSI and USB), and it provides details of the selected device such as device name, device model, firmware revision, serial number, device ID, bus type, LBA (logical block addressing) and total capacity.
You may have the program perform only a quick wipe, which only removes the partitions, erases the partition table, delete the active partition flag, MBR (Master Boot Record - the boot sector located at the very bning of partitioned storage devices) and all other data on a storage device. In addition to LLF (Low Level Format), the software features Quick Format and Standard Format. The two Format features allow you to format storage devices not recognized by Windows, be it a corrupted one or a logically broken one. A fascinating feature is boot disk creation; the software helps you create bootable USB drive or bootable hard drive after the formatting operation. You can boot to MSDOS, FreeDOS, or Windows operating systems with your storage device after a few clicks. The software is portable and it can be stored on a flash drive or any other external storage devices.
The software works with a broad range of storage devices, including HDD (Hard Disk Drive), SSD (Solid State Drive), and USB drives (USB flash drive, USB thumb drive, and USB portable drive). It supports most hard disk manufacturers such as Western Digital, Seagate, Hitachi, IBM, Toshiba, Maxtor, Samsung, and Quantum. For USB storage devices, the software supports virtually all the controller brands, such as Intel, Samsung, Micron, Phison, SMI, Marvell, Toshiba, Silicon Motion, PMC, Sierra, OCZ, JMicron, Maxiotek, Goke, Greenliant, Fusion-io, Realtek, SanDisk, Western Digital, Hyperstone, Novachips, and Lenovo.
Features of Disk Storage Low Level Format software
Low Level Format
Secure Format with strong data wipe algorithms
Quick Format in a split second
Slow Format
Adjust sector size from 512 bytes to 32MB
Support NTFS, FAT16, FAT32, and ExFAT file systems
Recognize UDF, HFS+, ReFS, NTFS, FAT16, FAT32, ExFAT file systems
Scan storage device for common errors before formatting a drive
Show serial number of storage device
Create startup disk for MS-DOS, FreeDOS, and Windows
Support FAT32 partition larger than 32GB
Repair corrupted USB drives and fix common issues with hard disks
Support Microsoft Windows 11/10/8/7/Vista/XP/2003/2008/2012/2016/2019/2021 (32-bit and 64-bit)
Whats New
Low Level Format now supports external USB drives and HP portable drives.
Show serial number of hard drives and USB flash drives
Support corrupted USB drives with NTFS and EXFAT file systems
DOWNLOAD
(Buy premium account for maximum speed and resuming ability)
https://nitroflare.com/view/F64106D8A26CD65/d6euy.Disk.Storage.Low.Level.Format.7.0.rar
https://rapidgator.net/file/686ee432c0aed68cae3a6458ec1a59c9/d6euy.Disk.Storage.Low.Level.Format.7.0.rar
-
By artae
File size: 7.38 MB
Disk Storage Low Level Format software is a software application that does Low Level Format like what is done in factory.
The software not only performs zero-fills to the storage device, but also restore the storage device to full capacity. The software allows you to revitalize your infected or corrupted hard drive by hiding the bad sectors in order to create a clean and error-free surface for your data. All the visible and invisible data to the operating systems are fully and irreversibly erased from the storage devices.
The software supports all types of storage devices connected to the computer, regardless of their interface (SATA, IDE, SCSI and USB), and it provides details of the selected device such as device name, device model, firmware revision, serial number, device ID, bus type, LBA (logical block addressing) and total capacity.
You may have the program perform only a quick wipe, which only removes the partitions, erases the partition table, delete the active partition flag, MBR (Master Boot Record - the boot sector located at the very bning of partitioned storage devices) and all other data on a storage device. In addition to LLF (Low Level Format), the software features Quick Format and Standard Format. The two Format features allow you to format storage devices not recognized by Windows, be it a corrupted one or a logically broken one. A fascinating feature is boot disk creation; the software helps you create bootable USB drive or bootable hard drive after the formatting operation. You can boot to MSDOS, FreeDOS, or Windows operating systems with your storage device after a few clicks. The software is portable and it can be stored on a flash drive or any other external storage devices.
The software works with a broad range of storage devices, including HDD (Hard Disk Drive), SSD (Solid State Drive), and USB drives (USB flash drive, USB thumb drive, and USB portable drive). It supports most hard disk manufacturers such as Western Digital, Seagate, Hitachi, IBM, Toshiba, Maxtor, Samsung, and Quantum. For USB storage devices, the software supports virtually all the controller brands, such as Intel, Samsung, Micron, Phison, SMI, Marvell, Toshiba, Silicon Motion, PMC, Sierra, OCZ, JMicron, Maxiotek, Goke, Greenliant, Fusion-io, Realtek, SanDisk, Western Digital, Hyperstone, Novachips, and Lenovo.
Features of Disk Storage Low Level Format software
Low Level Format
Secure Format with strong data wipe algorithms
Quick Format in a split second
Slow Format
Adjust sector size from 512 bytes to 32MB
Support NTFS, FAT16, FAT32, and ExFAT file systems
Recognize UDF, HFS+, ReFS, NTFS, FAT16, FAT32, ExFAT file systems
Scan storage device for common errors before formatting a drive
Show serial number of storage device
Create startup disk for MS-DOS, FreeDOS, and Windows
Support FAT32 partition larger than 32GB
Repair corrupted USB drives and fix common issues with hard disks
Features in Pro version
1. Support storage device up to 256 TB.
2. Low-Level format disk/drive not recognized by Windows.
3. Create a FAT32 volume larger than 32 GB in a split second.
4. Optimize storage device for read/write speed.
5. Restore disk/drive back to full capacity.
Whats New
Low Level Format now supports external USB drives and HP portable drives.
Show serial number of hard drives and USB flash drives
Support corrupted USB drives with NTFS and EXFAT file systems
Support Microsoft Windows 11/10/8/7/Vista/XP/2003/2008/2012/2016/2019/2021 (32-bit and 64-bit)
DOWNLOAD
(Buy premium account for maximum speed and resuming ability)
https://nitroflare.com/view/CC607856442515B/1itg6.Disk.Storage.Low.Level.Format.Pro.7.0.rar
https://rapidgator.net/file/b269655f457f26f1ba47b83437b779d8/1itg6.Disk.Storage.Low.Level.Format.Pro.7.0.rar
-
By artae
Disk Storage Low Level Format Pro v7.0 | File size: 7.38 MB
Disk Storage Low Level Format software is a software application that does Low Level Format like what is done in factory. The software not only performs zero-fills to the storage device, but also restore the storage device to full capacity. The software allows you to revitalize your infected or corrupted hard drive by hiding the bad sectors in order to create a clean and error-free surface for your data. All the visible and invisible data to the operating systems are fully and irreversibly erased from the storage devices.
The software supports all types of storage devices connected to the computer, regardless of their interface (SATA, IDE, SCSI and USB), and it provides details of the selected device such as device name, device model, firmware revision, serial number, device ID, bus type, LBA (logical block addressing) and total capacity.
You may have the program perform only a quick wipe, which only removes the partitions, erases the partition table, delete the active partition flag, MBR (Master Boot Record - the boot sector located at the very beginning of partitioned storage devices) and all other data on a storage device. In addition to LLF (Low Level Format), the software features Quick Format and Standard Format. The two Format features allow you to format storage devices not recognized by Windows, be it a corrupted one or a logically broken one. A fascinating feature is boot disk creation; the software helps you create bootable USB drive or bootable hard drive after the formatting operation. You can boot to MSDOS, FreeDOS, or Windows operating systems with your storage device after a few clicks. The software is portable and it can be stored on a flash drive or any other external storage devices.
The software works with a broad range of storage devices, including HDD (Hard Disk Drive), SSD (Solid State Drive), and USB drives (USB flash drive, USB thumb drive, and USB portable drive). It supports most hard disk manufacturers such as Western Digital, Seagate, Hitachi, IBM, Toshiba, Maxtor, Samsung, and Quantum. For USB storage devices, the software supports virtually all the controller brands, such as Intel, Samsung, Micron, Phison, SMI, Marvell, Toshiba, Silicon Motion, PMC, Sierra, OCZ, JMicron, Maxiotek, Goke, Greenliant, Fusion-io, Realtek, SanDisk, Western Digital, Hyperstone, Novachips, and Lenovo.
Features of Disk Storage Low Level Format software
Low Level Format
Secure Format with strong data wipe algorithms
Quick Format in a split second
Slow Format
Adjust sector size from 512 bytes to 32MB
Support NTFS, FAT16, FAT32, and ExFAT file systems
Recognize UDF, HFS+, ReFS, NTFS, FAT16, FAT32, ExFAT file systems
Scan storage device for common errors before formatting a drive
Show serial number of storage device
Create startup disk for MS-DOS, FreeDOS, and Windows
Support FAT32 partition larger than 32GB
Repair corrupted USB drives and fix common issues with hard disks
Features in Pro version
1. Support storage device up to 256 TB.
2. Low-Level format disk/drive not recognized by Windows.
3. Create a FAT32 volume larger than 32 GB in a split second.
4. Optimize storage device for read/write speed.
5. Restore disk/drive back to full capacity.
Whats New
Low Level Format now supports external USB drives and HP portable drives.
Show serial number of hard drives and USB flash drives
Support corrupted USB drives with NTFS and EXFAT file systems
Support Microsoft Windows 11/10/8/7/Vista/XP/2003/2008/2012/2016/2019/2021 (32-bit and 64-bit)
Homepage
https://www.go2pdf.com/
DOWNLOAD
(Buy premium account for maximum speed and resuming ability)
https://nitroflare.com/view/A68DFF216F68709/97uu9.Disk.Storage.Low.Level.Format.Pro.v7.0.rar
https://rapidgator.net/file/8164cde8025d1e7ce2ff86071c4709e6/97uu9.Disk.Storage.Low.Level.Format.Pro.v7.0.rar
-
-
Recently Browsing 0 members
No registered users viewing this page.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.