Search the Community

CSI ETABS Ultimate 19.1.0 Build 2420 (x64) File size: 878 MB The innovative and revolutionary new ETABS is the ultimate integrated software package for the structural analysis and design of buildings. Incorporating 40 years of continuous research and development, this latest ETABS offers unmatched 3D object based modeling and visualization tools, blazingly fast linear and nonlinear analytical power, sophisticated and comprehensive design capabilities for a wide-range of materials, and insightful graphic displays, reports, and schematic drawings that allow users to quickly and easily decipher and understand analysis and design results. From the start of design conception through the production of schematic drawings, ETABS integrates every aspect of the engineering design process. Creation of models has never been easier - intuitive drawing commands allow for the rapid generation of floor and elevation framing. CAD drawings can be converted directly into ETABS models or used as templates onto which ETABS objects may be overlaid. The state-of-the-art SAPFire 64-bit solver allows extremely large and complex models to be rapidly analyzed, and supports nonlinear modeling techniques such as construction sequencing and time effects (e.g., creep and shrinkage). Design of steel and concrete frames (with automated optimization), composite beams, composite columns, steel joists, and concrete and masonry shear walls is included, as is the capacity check for steel connections and base plates. Models may be realistically rendered, and all results can be shown directly on the structure. Comprehensive and customizable reports are available for all analysis and design output, and schematic construction drawings of framing plans, schedules, details, and cross-sections may be generated for concrete and steel structures. ETABS provides an unequaled suite of tools for structural engineers designing buildings, whether they are working on one-story industrial structures or the tallest commercial high-rises. Immensely capable, yet easy-to-use, has been the hallmark of ETABS since its introduction decades ago, and this latest release continues that tradition by providing engineers with the technologically-advanced, yet intuitive, software they require to be their most productive. Modeling Added codes for creep, shrinkage, and stiffness aging: Eurocode 2-2004, Australian Standard 3600-2009, New Zealand Standard 3101-2006 and GL 2000 models. Analysis Creep & Shrinkage Creep and shrinkage behavior now includes the effect of rebar to reduce axial shortening of columns and walls. Modal Damping Modal damping option for linear and nonlinear direct-integration time-history analysis, providing more realistic and conservative results. Results Display & Output Slab cracked-width display based on Eurocode 2-2004. Whats New read:ReleaseNotesETABSv1900.pdf DOWNLOAD (Buy premium account for maximum speed and resuming ability) http://nitroflare.com/view/633D4D42715C187/6768n.CSI.ETABS.Ultimate.19.1.0.Build.2420.x64.part1.rar http://nitroflare.com/view/49FCA7D18EC2790/6768n.CSI.ETABS.Ultimate.19.1.0.Build.2420.x64.part2.rar http://nitroflare.com/view/A2218F226AFA2D6/6768n.CSI.ETABS.Ultimate.19.1.0.Build.2420.x64.part3.rar https://rapidgator.net/file/043cf18804d069e2ef475cd84724c3c3/6768n.CSI.ETABS.Ultimate.19.1.0.Build.2420.x64.part1.rar https://rapidgator.net/file/b9ab0fded1c87be1b75427b8ea9c8b9d/6768n.CSI.ETABS.Ultimate.19.1.0.Build.2420.x64.part2.rar https://rapidgator.net/file/92544d9e3252910ba8ffdd4785fc9c35/6768n.CSI.ETABS.Ultimate.19.1.0.Build.2420.x64.part3.rar

CSI ETABS Ultimate v19.1.0 Build 2420 (x64) CSI ETABS Ultimate v19.1.0 Build 2420 (x64) | 877 MB Language: English The innovative and revolutionary new ETABS is the ultimate integrated software package for the structural analysis and design of buildings. Incorporating 40 years of continuous research and development, this latest ETABS offers unmatched 3D object based modeling and visualization tools, blazingly fast linear and nonlinear analytical power, sophisticated and comprehensive design capabilities for a wide-range of materials, and insightful graphic displays, reports, and schematic drawings that allow users to quickly and easily decipher and understand analysis and design results. From the start of design conception through the production of schematic drawings, ETABS integrates every aspect of the engineering design process. Creation of models has never been easier - intuitive drawing commands allow for the rapid generation of floor and elevation framing. CAD drawings can be converted directly into ETABS models or used as templates onto which ETABS objects may be overlaid. The state-of-the-art SAPFire 64-bit solver allows extremely large and complex models to be rapidly analyzed, and supports nonlinear modeling techniques such as construction sequencing and time effects (e.g., creep and shrinkage). Design of steel and concrete frames (with automated optimization), composite beams, composite columns, steel joists, and concrete and masonry shear walls is included, as is the capacity check for steel connections and base plates. Models may be realistically rendered, and all results can be shown directly on the structure. Comprehensive and customizable reports are available for all analysis and design output, and schematic construction drawings of framing plans, schedules, details, and cross-sections may be generated for concrete and steel structures. ETABS provides an unequaled suite of tools for structural engineers designing buildings, whether they are working on one-story industrial structures or the tallest commercial high-rises. Immensely capable, yet easy-to-use, has been the hallmark of ETABS since its introduction decades ago, and this latest release continues that tradition by providing engineers with the technologically-advanced, yet intuitive, software they require to be their most productive. Modeling Added codes for creep, shrinkage, and stiffness aging: Eurocode 2-2004, Australian Standard 3600-2009, New Zealand Standard 3101-2006 and GL 2000 models. Analysis Creep & Shrinkage Creep and shrinkage behavior now includes the effect of rebar to reduce axial shortening of columns and walls. Modal Damping Modal damping option for linear and nonlinear direct-integration time-history analysis, providing more realistic and conservative results. Results Display & Output Slab cracked-width display based on Eurocode 2-2004. DOWNLOAD (Buy premium account for maximum speed and resuming ability) http://nitroflare.com/view/DC728D6E47F1D38/a2yd3.CSI.ETABS.Ultimate.v19.1.0.Build.2420.x64.rar https://rapidgator.net/file/dc161791051260d209ea7e083e64c01e/a2yd3.CSI.ETABS.Ultimate.v19.1.0.Build.2420.x64.rar

CSI ETABS Ultimate 19.1.0 Build 2420 (x64) | 878 MB The innovative and revolutionary new ETABS is the ultimate integrated software package for the structural analysis and design of buildings. Incorporating 40 years of continuous research and development, this latest ETABS offers unmatched 3D object based modeling and visualization tools, blazingly fast linear and nonlinear analytical power, sophisticated and comprehensive design capabilities for a wide-range of materials, and insightful graphic displays, reports, and schematic drawings that allow users to quickly and easily decipher and understand analysis and design results. From the start of design conception through the production of schematic drawings, ETABS integrates every aspect of the engineering design process. Creation of models has never been easier - intuitive drawing commands allow for the rapid generation of floor and elevation framing. CAD drawings can be converted directly into ETABS models or used as templates onto which ETABS objects may be overlaid. The state-of-the-art SAPFire 64-bit solver allows extremely large and complex models to be rapidly analyzed, and supports nonlinear modeling techniques such as construction sequencing and time effects (e.g., creep and shrinkage). Design of steel and concrete frames (with automated optimization), composite beams, composite columns, steel joists, and concrete and masonry shear walls is included, as is the capacity check for steel connections and base plates. Models may be realistically rendered, and all results can be shown directly on the structure. Comprehensive and customizable reports are available for all analysis and design output, and schematic construction drawings of framing plans, schedules, details, and cross-sections may be generated for concrete and steel structures. ETABS provides an unequaled suite of tools for structural engineers designing buildings, whether they are working on one-story industrial structures or the tallest commercial high-rises. Immensely capable, yet easy-to-use, has been the hallmark of ETABS since its introduction decades ago, and this latest release continues that tradition by providing engineers with the technologically-advanced, yet intuitive, software they require to be their most productive. Modeling Added codes for creep, shrinkage, and stiffness aging: Eurocode 2-2004, Australian Standard 3600-2009, New Zealand Standard 3101-2006 and GL 2000 models. Analysis Creep & Shrinkage Creep and shrinkage behavior now includes the effect of rebar to reduce axial shortening of columns and walls. Modal Damping Modal damping option for linear and nonlinear direct-integration time-history analysis, providing more realistic and conservative results. Results Display & Output Slab cracked-width display based on Eurocode 2-2004. DOWNLOAD (Buy premium account for maximum speed and resuming ability) http://nitroflare.com/view/3C768BA2E976974/537u9.CSI.ETABS.Ultimate.19.1.0.Build.2420.x64.rar https://rapidgator.net/file/29e21e65c757728b478d3e1d62db2193/537u9.CSI.ETABS.Ultimate.19.1.0.Build.2420.x64.rar

CSI ETABS 19.1.0 build 2420 | 865.2 mb Computers and Structures, Inc. (CSI), is pleased to announce the availability of ETABS version 19.1.0 build 2420. This release includes enhanced PT modeling, improvements to loading and design codes, speedier Performance-Based Design (PBD), and other enhancements. Modeling PT tendon vertical profile enhanced. All editable information related to the tendon profile, geometry, loads, and losses are available in one location. Line Spring assignments are now available for "Null" line objects. Loading Uniform area loads assigned to floor objects are now additive when the loaded objects overlap. ASCE 7-16 auto seismic load has been enhanced to incorporate the exception contained on section 11.4. AS 1170.4 auto seismic load has been enhanced for base shear scaling based on Amendment 1 Design Concrete beam and strip-based slab design now allow control over including or excluding axial compression in flexural design if the axial compression reduces the required reinforcement. Axial tension and axial compression that increase the required flexural reinforcement are always considered. For post-tensioned construction all axial load is always considered. Eurocode 2-2004 concrete frame design has been updated to consider the extra longitudinal rebar due to shear. Performance-Based Design Calculation of shear yield (Vy) now includes user-specified rebar in beam and column hinges even if the member has not been designed. Faster initialization and finalization of the analysis process when running cases in parallel. Faster nonlinear stiffness formation, event determination, and state update operations for small to moderate sized models. Database Tables Interactive database editing is now available for Section-Designer (SD) sections, including general pier SD sections. Import and Export Mapping of Revit element Unique IDs to ETABS Object GUIDs can now be exported to Excel. Application Programming Interface (API) Improved performance and examples for remote API and COM clients. New Python API example uses direct communication with underlying .Net Objects ETABSis an engineering software product that caters to multi-story building analysis and design. Modeling tools and templates, code-based load prescriptions, analysis methods and solution techniques, all coordinate with the grid-like geometry unique to this class of structure. Basic or advanced systems under static or dynamic conditions may be evaluated using ETABS. For a sophisticated assessment of seismic performance, modal and direct-integration time-history analyses may couple with P-Delta and Large Displacement effects. Nonlinear links and concentrated PMM or fiber hinges may capture material nonlinearity under monotonic or hysteretic behavior. Intuitive and integrated features make applications of any complexity practical to implement. Interoperability with a series of design and documentation platforms makes ETABS a coordinated and productive tool for designs which range from simple 2D frames to elaborate modern high-rises. CSI ETABS Tutorials Founded in 1975, Computers and Structures, Inc. (CSI)is recognized globally as the pioneering leader in software tools for structural and earthquake engineering. Software from CSI is used by thousands of engineering firms in over 160 countries for the design of major projects, including the Taipei 101 Tower in Taiwan, One World Trade Center in New York, the 2008 Olympics Birds Nest Stadium in Beijing and the cable-stayed Centenario Bridge over the Panama Canal. CSI's software is backed by more than three decades of research and development, making it the trusted choice of sophisticated design professionals everywhere! Product:CSI ETABS Version:19.1.0 build 2420 Supported Architectures:x64 Website Home Page :www.csiamerica.com Language:english System Requirements:PC * Size:865.2 mb Processor - Minimum: Intel Pentium 4 or AMD Athlon 64 - Recommended: Intel i5/i7, AMD Athlon X4/Ryzen, or better - A 64-bit CPU is required - The SAPFire Analytical Engine includes multi-threaded solvers and algorithms that can take advantage of multi-core CPUs. The design algorithms can also utilize multiple cores. Operating System - Microsoft Windows 7, Microsoft Windows 8 or Microsoft Windows 10 - 64-bit processor Video Card - Minimum: Supporting 1024 by 768 resolution and 16 bits colors for standard (GDI+) graphics mode - Recommended: Discrete video card with NVIDIA GPU or equivalent and dedicated graphics RAM (512 Mb or larger) for DirectX graphics mode. The card must be DirectX 11 Compatible. - DirectX graphics mode fully utilizes the hardware acceleration provided by a GPU and dedicated graphics RAM. - For better graphics quality in terms of anti-aliasing and line thickness, the device raster drawing capabilities should support legacy depth bias. Memory - Minimum: 8 GB RAM - The problem size that can be solved and the speeds for solution & response recovery increase considerably with more RAM. Disk Space - 6 GB to install the software. - Additional space will be required for running and storing model files and analysis results, dependent upon the size of the models - Recommended: 500GB or larger PCIe Solid State Drive (SSD). External and network drives are not recommended. DOWNLOAD (Buy premium account for maximum speed and resuming ability) http://nitroflare.com/view/72CE04D16FB4B3A/t0eqi.CSI.ETABS.19.1.0.build.2420.rar https://rapidgator.net/file/825e43bcac940686b166b1249ec8450a/t0eqi.CSI.ETABS.19.1.0.build.2420.rar

CSI ETABS version 19.0.1 build 2307 | 980.9 mb Product: CSI ETABS Version: 19.0.1 build 2307 Supported Architectures: x64 Website Home Page : www.csiamerica.com Language: english System Requirements: PC * Size: 980.9 mb Computers and Structures, Inc. (CSI), is pleased to announce the availability of ETABS version 19.0.1 build 2307. Enhancements added to release include new loading codes, new and updated design codes, speedier Performance-Based Design (PBD), Perform 3D import. [b ETABS 19.0.1 Release notes - Date: 15 Dec 2020[/b] ETABS 19.0.1 Enhancements Analysis - Stiffness solution has been parallelized to further speed-up nonlinear static and direct-integration time-history load cases. - Tabular output for element nonlinear energy and base reactions is now much faster for load cases with many output steps. Loading - NBCC 2015 wind load now supports the dynamic procedure for Open and Rough Terrain using the exposure factor Ce. Wind-load calculations are now available in the project report. For the full list of new and improved features, and fixed bugs please refer to the release notes located ETABS is an engineering software product that caters to multi-story building analysis and design. Modeling tools and templates, code-based load prescriptions, analysis methods and solution techniques, all coordinate with the grid-like geometry unique to this class of structure. Basic or advanced systems under static or dynamic conditions may be evaluated using ETABS. For a sophisticated assessment of seismic performance, modal and direct-integration time-history analyses may couple with P-Delta and Large Displacement effects. Nonlinear links and concentrated PMM or fiber hinges may capture material nonlinearity under monotonic or hysteretic behavior. Intuitive and integrated features make applications of any complexity practical to implement. Interoperability with a series of design and documentation platforms makes ETABS a coordinated and productive tool for designs which range from simple 2D frames to elaborate modern high-rises. CSI ETABS Tutorials Founded in 1975, Computers and Structures, Inc. (CSI) is recognized globally as the pioneering leader in software tools for structural and earthquake engineering. Software from CSI is used by thousands of engineering firms in over 160 countries for the design of major projects, including the Taipei 101 Tower in Taiwan, One World Trade Center in New York, the 2008 Olympics Birds Nest Stadium in Beijing and the cable-stayed Centenario Bridge over the Panama Canal. CSI's software is backed by more than three decades of research and development, making it the trusted choice of sophisticated design professionals everywhere! Product: CSI ETABS Version: 19.0.1 build 2307 Supported Architectures: x64 Website Home Page : www.csiamerica.com Language: english System Requirements: PC * Size: 980.9 mb Processor - Minimum: Intel Pentium 4 or AMD Athlon 64 - Recommended: Intel i5/i7, AMD Athlon X4/Ryzen, or better - A 64-bit CPU is required - The SAPFire Analytical Engine includes multi-threaded solvers and algorithms that can take advantage of multi-core CPUs. The design algorithms can also utilize multiple cores. Operating System - Microsoft Windows 7, Microsoft Windows 8 or Microsoft Windows 10 - 64-bit processor Video Card - Minimum: Supporting 1024 by 768 resolution and 16 bits colors for standard (GDI+) graphics mode - Recommended: Discrete video card with NVIDIA GPU or equivalent and dedicated graphics RAM (512 Mb or larger) for DirectX graphics mode. The card must be DirectX 11 Compatible. - DirectX graphics mode fully utilizes the hardware acceleration provided by a GPU and dedicated graphics RAM. - For better graphics quality in terms of anti-aliasing and line thickness, the device raster drawing capabilities should support legacy depth bias. Memory - Minimum: 8 GB RAM - The problem size that can be solved and the speeds for solution & response recovery increase considerably with more RAM. Disk Space - 6 GB to install the software. - Additional space will be required for running and storing model files and analysis results, dependent upon the size of the models - Recommended: 500GB or larger PCIe Solid State Drive (SSD). External and network drives are not recommended. DOWNLOAD http://nitroflare.com/view/C9A2BAD51AF22C0/lcsh0.ISeB1901bu2307.rar http://nitroflare.com/view/05178B2B842693B/lcsh0.ReleaseNotesETABSv1901.rar https://rapidgator.net/file/a1e23ba05e1b552adce9be0e1629b731/lcsh0.ISeB1901bu2307.rar https://rapidgator.net/file/64f14b63ad64601390813b24d9670a80/lcsh0.ReleaseNotesETABSv1901.rar