Search the Community

Geometric DFMPro 9.0.0.2301 for NXSeries | 287.5 mb Geometric Ltd. a leader in Product lifecycle Management (PLM), Global Engineering Services and Offshore Product Development (OPD) Solutions and Technologies, announced the release of version 9.0 of its automated design for manufacturability solution, DFMPro for NX software. [b[i]NX 2007 Series Support[/i][/b] Added New Rules Composite Module Minimum Distance Between Pocket to Panel Edge Composite structure panels used in aerospace products have a higher strength-to-weight ratio. The minimum distance between cutouts, pockets, and panel edges should be maintained to avoid tearing composite panels. It could affect the load-carrying capacity of the panel and may result in damage during loading conditions. Maintaining a sufficient distance between the cutouts, pockets, and panel edges are always recommended Minimum Distance Between Insert Hole to Panel Edge Composite panels are strong and stiff with a higher strength to weight ratio, but their flexible cores are weak and easily damaged. When the insert holes are drilled too close to the panel edges or cutouts, there is a possibility of damaging the core area near the hole due to weak and minimum available core material. Due to this, inserts cannot be appropriately placed, and the core may get dislocated. This could affect the load-carrying capacity of the panel and may result in damage during certain loading conditions. Hence it is always recommended to provide some minimum distance between panel edge and insert holes. As a general guideline, the minimum distance should be 15 mm. Recommendations:The general guideline suggests that the minimum distance between the insert hole to panel edge should be 15 mm. Minimum Spacing Between Insert Holes Composite structure panels used in aerospace products have a higher strength-to-weight ratio. But due to their weak core structure, they are not suited to withstand localized loads. Hence, inserts are used to transfer such localized loads to composite panels. Maintain enough spacing between insert holes to avoid the overcut problem. Recommendations:The general guideline suggests that for the honeycomb panel, the minimum spacing should be 30 mm, and for the foam, it should be 20 mm [b[i]Composite - DFMPro Settings[/i][/b] Insert holes are identified through colors. Users can define colors code to identify Insert Hole or RGB values. It is a Global-level setting, and only the admin can define it [b[i]Enhanced Existing Rule[/i][/b] Slot to Hole Alignment - Assembly Module Gap between two Parts: Distance between faces of parts on which hole and slot are present. Selection of"Ignore cases - hole axis and slot centerline is aligned"checkbox allows to ignore cases where the hole axis and slot centerline is aligned. [b[i]Added New Feature - Machining Setup (Mill Module)[/i][/b] Machining Setup It provides an option to view and edit machining setups. Machining setups and their associated feature information would further help the design engineer optimize the design. Machining features are classified into different setups, and the design engineer can view setups with machining direction. With the button, features can be moved from one setup to other valid setups. [b[i]Cavity and Cavity Mold Type support[/i][/b] DFMPro provides an option to select mold type Core/Cavity and Cavity Cavity. Depending on mold type selection and pulling direction, mold faces are classified into two half - Cavity 1 and Cavity 2. DFMPro is a CAD integrated solutiondeveloped using HCL's DFx technology to carry out DFx review of product design. DFMPro enables faster, less costly and more optimized product development, as well as automation of the DFx review process. DFMPro provides a sophisticated environment for designers to custom-configure the pre-built design rules and hence the knowledge. Providing simple, accurate and robust design analysis based on DFx related rules, DFMPro ultimately leads to better products by giving designers the confidence and capabilities to build superior models. Designers are free to innovate with the assurance that they won't pass costly mistakes downstream. A: DFMPro is available as add-in on top of Dassault SolidWorks, Siemens NX and PTC Creo Parametric. It is also available as a standalone version named as 'Geometric DFX' which supports file formats from all leading CAD platforms including CATIA, Solid Edge and Inventor. DFMPro for NX, a best practice driven design for manufacturing software integrated within NX, help design engineers to identify and evaluate their designs for downstream manufacturability, assembly, quality, serviceability, (DFx) related issues upfront and reduce unnecessary rework and engineering changes. It uses the existing, familiar and proven NX Check-Mate framework, and provides an HD3D interface for problem navigation and tagging. It facilitates out-of-the-box validation for manufacturing process like plastic injection molding, sheet metal fabrication, machining, casting, assembly and more DFMPro For NX Overview HCL Technologiesis a next-generation global technology company that helps enterprises reimagine their businesses for the digital age. Our technology products, services and engineering are built on four decades of innovation, with a world-renowned management philosophy, a strong culture of invention and risk-taking, and a relentless focus on customer relationships. Product:Geometric DFMPro Version:9.0.0 build 2301 Supported Architectures:x64 Website Home Page :https://dfmpro.com/ Languages Supported:english System Requirements:PC * Size:287.5 mb DOWNLOAD (Buy premium account for maximum speed and resuming ability) https://nitroflare.com/view/8C744066F22C540/u9hjv.Geometric.DFMPro.9.0.0.2301.for.NXSeries.rar https://rapidgator.net/file/bfcb1c5a67f1984801510d3781a22c69/u9hjv.Geometric.DFMPro.9.0.0.2301.for.NXSeries.rar

Geometric DFMPro 8.0.0.9498 for NXSeries | 1.6 Gb Geometric Ltd. a leader in Product lifecycle Management (PLM), Global Engineering Services and Offshore Product Development (OPD) Solutions and Technologies, announced the release of version 8.0 of its automated design for manufacturability solution, DFMPro for NX software. The latest version delivers many new customer-driven enhancements for users of NX, a leading integrated 3D computer-aided design, manufacturing and engineering analysis (CAD/CAM/CAE) software, developed by Siemens' PLM software business. [b Key benefits of this release [/b] - NX 1953 series support - Teamcenter 13.0 support - Added New PMI Based Geometrical Tolerance Rules - General Module (7 rules) - Milling (4 rules) - Drilling (2 rules) - Added new "Sheet Metal Forming" module with 3 new rules - Minimum Bend Radius - Minimum Sheet Thickness - Recommended Hole Diameter - Added new rule for "Additive Manufacturing" - Avoid Sharp Edges - Performance improvement for - "Minimum Clearance Between Components" Assembly rule - DFMPro New User Interface - key Features For complete details on the new features of Geometric DFMPro 8.0 please refer to the Design for manufacturability (DFM), sometimes also known as design for manufacture, is a perfectly straightforward idea: Products should be designed so that they can be manufactured. Moreover, they should be designed so that they are as easy and inexpensive to manufacture as possible. For machined parts, for example, you need to be concerned with the material, with tool accessibility, and with the depth and shape of cavities and holes. Injection-molded parts need to slip easily out of their molds. For anything other than the simplest parts and products, DFM can involve volumes of rules that can be hard to remember and time-consuming to check. Design reviews consume the time of experts. If a part fails design review, it heads back to the designer to be redesigned. This rework is expensive in terms of both time and money. Enter DFM software such as DFMPro from Geometric Global. DFMPro is a DFM tool that runs within your CAD software: Creo Parametric (formerly Pro/ENGINEER), Dassault Systemes SolidWorks, Siemens NX and NX series. DFMPro acts something like a spell checker for your CAD designs, providing quick checking of copious design rules to improve the manufacturability of parts and assemblies, and to reduce their manufacturing cost. It comes out of the box with more than 100 configurable rules-pulled from various handbooks, guidelines and DFM experts. You can customize the application to add more. DFMPro automatically recognizes key features from your CAD designs. You don't have to tell it where the ribs and bosses are; it will locate them on its own. Run DFMPro and, after a few seconds or minutes, it returns a hierarchical, interactive list of your problem areas. You can see at a glance how many rules your design breaks, what those rules are, and where each instance of the problem is. You'll also get a list of all the rules your design passed, as well as those rules that don't apply to this design. Click on a broken rule, and all instances of the problem are highlighted on your CAD model. Click on a problem, and you'll zoom in on that feature and receive a description of the issue. The descriptions go way beyond "FAILURE: RULE 27." They give the design engineer actual useful information such as, "There is no fillet at the base of the boss, whereas it is recommended to have a fillet 0.25 times the nominal wall thickness of the part." DFMPro will even explain the rules. It will tell you, for example, not just that your cavity doesn't have the minimum draft angle, but what draft angles are and why they are important, complete with illustrated examples and recommendations. This should actually help new design engineers to understand and implement proper design practices. DFMPro For NX Overview HCL Technologies is a next-generation global technology company that helps enterprises reimagine their businesses for the digital age. Our technology products, services and engineering are built on four decades of innovation, with a world-renowned management philosophy, a strong culture of invention and risk-taking, and a relentless focus on customer relationships. Product: Geometric DFMPro Version: 8.0.0 build 9498 * Supported Architectures: x64 Website Home Page : http://dfmpro.geometricglobal.com Language: english System Requirements: PC ** Size: 1.6 Gb - Geometric DFMPro 8.0.0.9498 for NX 1847-1899 Seies - Geometric DFMPro 8.0.0.9498 for NX 12 - Geometric DFMPro 8.0.0.9498 for NX 1926-1953 Series Before installing DFMPro for NX, ensurethat the following system requirements fulfilled Supported NX Version - NX 1847 Series - NX 1872 Series - NX 1899 Series - NX 1926 Series - NX 1953 Series - NX NX 12.0.1.7 and above Supported Microsoft Windows Operating Systems - 64‐bit version of Windows 10 (Home editions are not supported) - 64‐bit version of Windows 8.1 (Home editions are not supported) - 64‐bit version of Windows 7 SP1 or higher(Home editions are not supported) Recommended RAM - Recommended 8 GB or more (Minimum: 4 GB) DiskSpace - Minimum: 4 GB DOWNLOAD http://nitroflare.com/view/6779CA10B6B8A8C/lhi4i.DFMPro.800.9498.for.NX12.rar http://nitroflare.com/view/1F3E1E5658A870B/lhi4i.DFMPro.800.9498.for.NX19261953Series.rar http://nitroflare.com/view/984BE377C3148E7/lhi4i.DFMPro.800.9498.for.NX19471899Series.rar http://nitroflare.com/view/17C1A21FF3E44F9/lhi4i.DFMProReleaseNote.rar https://rapidgator.net/file/620f2648a57976023b236616139b7d83/lhi4i.DFMPro.800.9498.for.NX12.rar https://rapidgator.net/file/264af45d5d73e334cd697f1d37f2c597/lhi4i.DFMPro.800.9498.for.NX19261953Series.rar https://rapidgator.net/file/59f415c8ec38ee5fb3273eebcb55bf98/lhi4i.DFMPro.800.9498.for.NX19471899Series.rar https://rapidgator.net/file/37b5783f1957a066a57713b1579774a1/lhi4i.DFMProReleaseNote.rar