Jump to content

Modbus Poll 9.5.1.1530


artae
 Share

Recommended Posts


UQqf3b-Tycgm-CJFJAyx-YIZv-WD2-EO2b-X56.jpg
Modbus Poll 9.5.1.1530 | File size: 3.2 MB

Modbus Poll is a Modbus master simulator designed primarily to help developers of Modbus slave devices or others that want to test and simulate the Modbus protocol. With the multiple document interface you can monitor several Modbus slaves and/or data areas at the same time. For each window you simply specify the Modbus slave ID, function, address, size and poll rate. You can read and write registers and coils from any window. If you want to change a single register, simply double click the value. Or you can change multiple registers/coils. Multiple data formats such as float, double and long with word order swapping are available.

Exception errors are shown on the status line.
If you are a slave developer you can compose and send your own test strings in the "test center" and check the result from the slave in hex numbers.
OLE Automation for interfacing with Excel. To interpret and show the Modbus data according to your specific requirements. E.g. edit data in Excel and then transmit the data to your slave device! Try the Excel example.xlsm installed with the program.

Supported protocol variants:
Modbus RTU
Modbus ASCII
Modbus TCP/IP
Modbus RTU Over TCP/IP
Modbus ASCII Over TCP/IP
Modbus UDP/IP
Modbus RTU Over UDP/IP
Modbus ASCII Over UDP/IP

MODBUS POLL Technical Facts and Features:
OLE Automation for easy interface to Excel using Macro language VBA
Read/write of up to 125 Registers
Read/write of up to 2000 Inputs/Coils
Test Center (Compose your own test strings)
Print and print preview
Monitoring of serial data traffic
Data logging to text file
Data logging direct to Excel
Context sensitive help
28 Display formats such as float, double etc.
Adjustable Address Base (0 or 1)
Font and selection
Conditional color selection
Scaling
Broadcast (slave ID 0)
Easy control of RS-485 converters with RTS toggle
ENRON/DANIEL Mode
6 digit addresses
Real time Charting

Supported Modbus Functions:
01: Read coil status
02: Read input status
03: Read holding registers
04: Read input registers
05: Force single coil
06: Preset single register
15: Force multiple coils
16: Preset multiple registers
17: Report slave ID
22: Mask write register
23: Read/Write registers

Whats New
https://www.modbustools.com/mbpoll-user-manual.html


HOMEPAGE
https://www.modbustools.com

DOWNLOAD
(Buy premium account for maximum speed and resuming ability)


http://nitroflare.com/view/3FF1FA70EA960D3/7gtk6.Modbus.Poll.9.5.1.1530.rar



https://rapidgator.net/file/663f03590e51cc1e9cdde9d6d4860260/7gtk6.Modbus.Poll.9.5.1.1530.rar


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Content

    • By artae
      File size: 2.2 MB

      Modbus Slave is for simulating up to 32 slave devices in 32 windows!

      . Speed up your PLC programming with this simulating tools. Start programming and test before you receive your slave device from supplier. Data contained with any open document is accessible to the master application. Same user interface as Modbus Poll. Support function 01, 02, 03, 04, 05, 06, 15, 16, 22 and 23.
      Monitoring of serial traffic. OLE Automation for interfacing with Visual Basic, Excel etc. To interpret and show the Modbus data according to your specific requirements. E.g. edit edit your slave data in Excel. Try the Excel example.xls included with the program.

      Each window opened within Modbus Slave may be configured to represent data from the same or different slave node.

      OLE Automation for interfacing with Excel. To interpret and show the Modbus data according to your specific requirements. E.g. edit data in Excel and then transmit the data to your slave device! Try the Excel example.xlsm installed with the program.

      Supported protocol variants:

      Modbus RTU

      Modbus ASCII

      Modbus TCP/IP

      Modbus RTU Over TCP/IP

      Modbus UDP/IP

      Modbus RTU Over UDP/IP

      MODBUS Slave Technical Facts and Features:

      OLE Automation for easy interface to Excel using Macro language VBA

      Print and print preview

      Monitoring of serial data traffic

      Context sensitive help

      12 Display formats such as float, double etc.

      Adjustable Address Base (0 or 1)

      Font and color selection

      Broadcast (slave ID 0)

      Easy control of RS-485 converters with RTS toggle

      Supported Modbus Functions:

      01: Read coil status

      02: Read input status

      03: Read holding registers

      04: Read input registers

      05: Force single coil

      06: Preset single register

      15: Force multiple coils

      16: Preset multiple registers

      22: Mask write register

      23: Read/Write registers

      Updates: official site does not provide any info about changes in this version.
      DOWNLOAD
      (Buy premium account for maximum speed and resuming ability)


      https://nitroflare.com/view/09DC91A75EAE680/i68la.Modbus.Slave.7.4.2.1612.rar



      https://rapidgator.net/file/e32eba085d2c23527590cf8b2c512400/i68la.Modbus.Slave.7.4.2.1612.rar


    • By artae
      File size: 3.3 MB

      Modbus Poll is a Modbus master simulator designed primarily to help developers of Modbus slave devices or others that want to test and simulate the Modbus protocol. With the multiple document interface you can monitor several Modbus slaves and/or data areas at the same time. For each window you simply specify the Modbus slave ID, function, address, size and poll rate. You can read and write registers and coils from any window. If you want to change a single register, simply double click the value. Or you can change multiple registers/coils. Multiple data formats such as float, double and long with word order swapping are available.

      Exception errors are shown on the status line.
      If you are a slave developer you can compose and send your own test strings in the "test center" and check the result from the slave in hex numbers.
      OLE Automation for interfacing with Excel. To interpret and show the Modbus data according to your specific requirements. E.g. edit data in Excel and then transmit the data to your slave device! Try the Excel example.xlsm installed with the program.

      Supported protocol variants:
      Modbus RTU
      Modbus ASCII
      Modbus TCP/IP
      Modbus RTU Over TCP/IP
      Modbus ASCII Over TCP/IP
      Modbus UDP/IP
      Modbus RTU Over UDP/IP
      Modbus ASCII Over UDP/IP

      MODBUS POLL Technical Facts and Features:
      OLE Automation for easy interface to Excel using Macro language VBA
      Read/write of up to 125 Registers
      Read/write of up to 2000 Inputs/Coils
      Test Center (Compose your own test strings)
      Print and print preview
      Monitoring of serial data traffic
      Data logging to text file
      Data logging direct to Excel
      Context sensitive help
      28 Display formats such as float, double etc.
      Adjustable Address Base (0 or 1)
      Font and selection
      Conditional color selection
      Scaling
      Broadcast (slave ID 0)
      Easy control of RS-485 converters with RTS toggle
      ENRON/DANIEL Mode
      6 digit addresses
      Real time Charting

      Supported Modbus Functions:
      01: Read coil status
      02: Read input status
      03: Read holding registers
      04: Read input registers
      05: Force single coil
      06: Preset single register
      15: Force multiple coils
      16: Preset multiple registers
      17: Report slave ID
      22: Mask write register
      23: Read/Write registers

      Whats New
      https://www.modbustools.com/mbpoll-user-manual.html

      HOMEPAGE
      https://www.modbustools.com
      DOWNLOAD
      (Buy premium account for maximum speed and resuming ability)


      https://nitroflare.com/view/45BA14EE66445AE/fz5ia.Modbus.Poll.9.6.0.1607.rar



      https://rapidgator.net/file/e34c49c6129b04b5a7ef29098a29ddb8/fz5ia.Modbus.Poll.9.6.0.1607.rar


    • By artae
      File Size: 10.4 MB

      All-in-one DWG Converter - Batch DWG converter that allows you to convert DWG DXF and DWF to PDF, WMF, JPEG, TIFF, EPS, SVG, CGM...,Supports command line parameters, it is also a very nice Free DWG Viewer.

      Features:
      Supports to open various DWG,DXF formats (R2.5-R2018) and DWF;
      DWG to PDF, DWG to JPEG, DWG to TIFF, DWG to EPS, DWG to PLT, DWG to SVG...
      DWF to DWG.
      Batch publish DWG to DWF.
      Supports to save DWG and DXF into DWF format(Beta);
      Identify literal fonts and entity color correctly;
      Supports batched conversion of multiple files;
      Supports to select the printout of color or monochrome raster file; set background color freely;
      Print out raster mask file; be used as image channel (used in Photoshop etc.);
      Replaces fonts.
      Sets the size of raster file to be printed out freely;
      Supports full-screen mode ( press F );
      Supports printing;
      Supports AutoCAD pen sets file (*.ctb).
      Supports the paper setting of each layout, can adjust the size of output pages with its layout automatically.
      Supports 3D objects Hidden line removal when convert DWG,DXF to other formats.
      Supports user-defined Watermark.
      Creates PDF bookmark automatically with layout name and file name, and you can edit them.
      Supports PDF's security Options.
      Can export OLE entity to PDF file (Such as: inline Word, Excel objects in the DWG drawing);
      Can export layer information and raster image in the dwg/dxf file to PDF file
      Batch recover DWG/DXF files;
      Can select a window area for conversion;
      Exports the arc,circle objects to true arc,circle objects of other vector file.
      Supports true color
      Supports pen width and destination colors settings, and can export/import these settings;
      SHX font, XRef and Image search path
      Supports to separate layers to drawings(one drawing per layer).
      What you see is what you get
      Supports command line mode
      Free DWG viewer
      Supports Windows 2000, XP, Vista, Win7, Win8, Win10 without AutoCAD.

      What can Acme CAD Converter do for you ?
      DWG DXF File version conversion.
      Converts DWG, DXF, DWF to PDF.
      Converts DWG, DXF, DWF to EPS, CGM, HPGL(*.PLT).
      Converts DWG, DXF, DWF to WMF, BMP, GIF, JPEG, TIFF, PNG, TGA, PCX.
      Converts DWG, DXF, DWF to SVG.
      Batch converts multi DWG DXF and DWF files to a single PDF.
      Inserts DWG DXF and DWF into MS Word.(converts DWG to WMF)
      Replaces the missing fonts.
      Batch recovers DWG and DXF files.
      Package multi-DWG or DXF drawings together into a zip file with all related resource files(such as: font, raster image, XRef files...).
      Free DWG Viewer.

      WHATS NEW:
      http://www.dwgtool.com/acmecadhis.htm

      HOMEPAGE
      http://www.dwgtool.com/
      DOWNLOAD
      (Buy premium account for maximum speed and resuming ability)


      http://nitroflare.com/view/92A616AE55DF828/vhivc.Acme.CAD.Converter.2021.8.10.1.1530..Rus.rar



      https://rapidgator.net/file/8780d568f82d0d467c3ee450abdaf705/vhivc.Acme.CAD.Converter.2021.8.10.1.1530..Rus.rar


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...