xhun Posted June 1, 2009 Share Posted June 1, 2009 Windows Xp Pro Sata Raid Drivers New Version [Windows XP SP3 5508] Boot edilebilir ve tamamen orjinal olan SP2 li windowsun üzerine kurulu SP3 ile birlikte Media Player 11, Internet Explorer 7 ve Notebooklar için gerekli tüm Sata Raid Sürücüleri eklenmiştir. İçerisinden hiçbir bileşen çıkartılmamıştır ve katılımsız değildir Tam Sürümdür. Dilerseniz Desktoplar içinde Kullanabilirsiniz İçerisinde serial bulunmaktadır Kendi Upload ım. Rar şifresi ekli emeğe saygı. Ona da iki kez tıklayınca içinden Windows XP Sp3 Tr image i çıkacak. Onu da iki kez tıklayarak boş bir CD ye yazdırabilirsiniz. Windows kurulumunda serial gerektirmez. Yani istemiyor. Yükledim. Sorunsuz kullanılıyor. SP3 TR paket yüklü geliyor. Yine de bir sorununuz, ya da bir sorunuz olursa lütfen yazın. Ayrıca;WGP2M-G8M6T-BT7D4-P7RY7-27K76 bu serial i tüm xp , xp sp1, xp sp2 türkçe veya ingilizce farketmez kurulumlarında kullanabilirsiniz sorun vermez çalışır. Ek liste Sürücüler : ************************************************************ ************************************************************ * Installation Readme for Intel® Matrix Storage Manager. * * Refer to the system requirements for the operating * systems supported by Intel® Matrix Storage Manager. * * This document makes references to products developed by * Intel. There are some restrictions on how these products * may be used, and what information may be disclosed to * others. Please read the Disclaimer section at the bottom * of this document, and contact your Intel field * representative if you would like more information. * ************************************************************ ************************************************************ ************************************************************ * Intel is making no claims of usability, efficacy or * warranty. The INTEL SOFTWARE LICENSE AGREEMENT contained * herein completely defines the license and use of this * software. ************************************************************ ************************************************************ * CONTENTS OF THIS DOCUMENT ************************************************************ This document contains the following sections: 1. Overview 2. System Requirements 3. Language Support 4. Determining the System Mode 5. Installing the Software 6. Verifying Installation of the Software 7. Advanced Installation Instructions 8. Identifying the Software Version Number 9. Uninstalling the Software 10. Entering the Option ROM User Interface 11. Option ROM RAID Volume Management 12. Options to RESET the RAID volume in Option ROM 13. Verifying the Version of the Option ROM Software ************************************************************ * 1. OVERVIEW ************************************************************ The Intel® Matrix Storage Manager is designed to provide functionality for the following Storage Controllers: - Intel® 82801HEM SATA RAID I/O Controller - Intel® 82801HEM SATA AHCI I/O Controller - Intel® 82801HBM SATA AHCI I/O Controller - Intel® 82801HR/HH/HO SATA RAID Controller - Intel® 82801HR/HH/HO SATA AHCI Controller - Intel® 631xESB/632xESB SATA RAID Controller - Intel® 631xESB/632xESB SATA AHCI Controller - Intel® 82801GHM SATA RAID Controller - Intel® 82801GBM SATA AHCI Controller - Intel® 82801GR SATA RAID Controller - Intel® 82801GR SATA AHCI Controller - Intel® 82801GH SATA RAID Controller - Intel® 82801GH SATA AHCI Controller - Intel® 82801FR SATA RAID Controller - Intel® 82801FR SATA AHCI Controller - Intel® 82801FBM SATA AHCI Controller This product is available for use on systems using the Intel® Pentium® Processor or Intel® Core2 Duo Processor with the following I/O Controller Hub: - Intel® 82801HEM I/O Controller Hub (ICH8M-E) - Intel® 82801HBM I/O Controller Hub (ICH8M) - Intel® 82801HR/HH/HO I/O Controller Hub (ICH8R) - Intel® 631xESB/632xESB I/O Controller Hub (ESB2) - Intel® 82801GHM I/O Controller Hub (ICH7MR) - Intel® 82801GBM I/O Controller Hub (ICH7M) - Intel® 82801GR I/O Controller Hub (ICH7R) - Intel® 82801GH I/O controller Hub (ICH7DH) - Intel® 82801FR I/O Controller Hub (ICH6R) - Intel® 82801FBM I/O Controller Hub (ICH6M) ************************************************************ * 2. SYSTEM REQUIREMENTS ************************************************************ 1. The system must contain an Intel® Core2 Duo or Intel® Core2 Extreme or Intel® Pentium® Processor or Intel® Xeon Processor and one of the following Intel products: - Intel® 82801HEM I/O Controller Hub (ICH8M-E) - Intel® 82801HBM I/O Controller Hub (ICH8M) - Intel® 82801HR/HH/HO I/O Controller Hub (ICH8R) - Intel® 631xESB/632xESB I/O Controller Hub (ESB2) - Intel® 82801GHM I/O Controller Hub (ICH7MR) - Intel® 82801GBM I/O Controller Hub (ICH7M) - Intel® 82801GR I/O Controller Hub (ICH7R) - Intel® 82801GH I/O Controller Hub (ICH7DH) - Intel® 82801FR I/O Controller Hub (ICH6R) - Intel® 82801FBM I/O Controller Hub (ICH6M) 2. The system must be running on one of the following operating systems: - Microsoft* Vista* - Microsoft* Vista* x64 Edition (NOTE 1) - Microsoft* Windows* XP Home Edition - Microsoft* Windows* XP Professional - Microsoft* Windows* XP x64 Edition (NOTE 1) - Microsoft* Windows* 2000 Advanced Server - Microsoft* Windows* Server 2003 - Microsoft* Windows* Server 2003, Web x64 Edition (NOTE 1) - Microsoft* Windows* Server 2003, Standard x64 Edition (NOTE 1) - Microsoft* Windows* Server 2003, Enterprise x64 Edition (NOTE 1) - Microsoft* Windows* Media Center Edition NOTE 1: If the system is running Windows* 64-bit version, the Intel® Matrix Storage Manager driver supporting 64-bit should be used. 3. The following operating systems are not supported: Any version of the following Microsoft operating systems: - MS-DOS - Windows 3.1 - Windows NT 3.51 - Windows 95 - Windows 98 - Windows Millennium Edition (Me) - Windows NT 4.0 - Windows 2000 Datacenter Server - Windows 2000 Professional Any version of the following operating systems: - Linux - UNIX - BeOS - MacOS - OS/2 4. The system should contain at least the minimum system memory required by the operating system. 5. The 'Intel® Chipset Software Installation Utility' must be installed prior to installing the Intel® Matrix Storage Manager. ************************************************************ * 3. LANGUAGE SUPPORT ************************************************************ Below is a list of the languages (and their abbreviations) for which the Intel® Matrix Storage Manager software has been localized. The language code is listed in parentheses after each language. ARA -> Arabic (Saudi Arabia) (0401) CHS -> Chinese (Simplified) (0804) CHT -> Chinese (Traditional) (0404) CSY -> Czech (0405) DAN -> Danish (0406) NLD -> Dutch (0413) ENU -> English (United States) (0409) FIN -> Finnish (040B) FRA -> French (International) (040C) DEU -> German (0407) ELL -> Greek (0408) HEB -> Hebrew (040D) HUN -> Hungarian (040E) ITA -> Italian (0410) JPN -> Japanese (0411) KOR -> Korean (0412) NOR -> Norwegian (0414) PLK -> Polish (0415) PTB -> Portuguese (Brazil) (0416) PTG -> Portuguese (Standard) (0816) RUS -> Russian (0419) ESP -> Spanish (040A) SVE -> Swedish (041D) THA -> Thai (041E) TRK -> Turkish (041F) ************************************************************ * 4. DETERMINING THE SYSTEM MODE ************************************************************ To use this readme effectively, you will need to know what mode your system is in. The easiest way to determine the mode is to identify how the Serial ATA controller is presented within the Device Manager. The following procedure will guide you through determining the mode. 1. On the Start menu: 1a. For Windows* XP or later operating systems, select Control Panel. 2. Open the 'System' applet (you may first have to select 'Switch to Classic View'). 3. Select the 'Hardware' tab. 4. Select the 'Device Manager' button. 5. From the Device Manager, look for an entry named 'Storage Controllers' for Windows Vista and 'SCSI and RAID Controllers' for Windows XP and later operating systems. If this entry is present, expand it and look for one of the following controllers: - 'Intel® 82801HEM RAID I/O Controller' If the controller above is present, the system is an ICH8M-E system in RAID mode and no further action is required - 'Intel® 82801HR/HH/HO SATA RAID Controller' If the controller above is present, the system is an ICH8R system in RAID mode and no further action is required - 'Intel® 631xESB/632xESB SATA RAID Controller' If the controller above is present, the system is an ESB2 system in RAID mode and no further action is required - 'Intel® 82801GHM SATA RAID Controller' If the controller above is present, the system is an ICH7MR system in RAID mode and no further action is required - 'Intel® 82801GR SATA RAID Controller' If the Controller above is present, the system is an ICH7R system in RAID mode and no further action is required. - 'Intel® 82801GH SATA RAID Controller' If the Controller above is present, the system is an ICH7DH system in RAID mode and no further action is required. - 'Intel® 82801FR SATA RAID Controller' If the controller above is present, the system is an ICH6R system in RAID mode and no further action is required. - If none of the controllers above are shown, then the system is not running in RAID mode and you should continue with step 6 below. 6. From the Device Manager, look for an entry named 'IDE ATA/ATAPI controllers'. If this entry is present, expand it and look for one of the following controllers: - 'Intel® 82801HEM AHCI I/O Controller' If the controller above is present, the system is an ICH8M-E system in AHCI mode and no further action is required - 'Intel® 82801HBM AHCI I/O Controller' If the controller above is present, the system is an ICH8M system in AHCI mode and no further action is required - 'Intel® 82801HR/HH/HO SATA AHCI Controller' If the controller above is present, the system is an ICH8R system in AHCI mode and no further action is required - 'Intel® 631xESB/632xESB SATA AHCI Controller' If the controller above is present, the system is an ESB2 system in AHCI mode and no further action is required. - 'Intel® 82801GBM SATA AHCI Controller' If the controller above is present, the system is an ICH7M system in AHCI mode and no further action is required. - 'Intel® 82801GR SATA AHCI Controller' If the controller above is present, the system is an ICH7R system in AHCI mode and no further action is required. - 'Intel® 82801GH SATA AHCI Controller' If the controller above is present, the system is an ICH7DH system in AHCI mode and no further action is required. - 'Intel® 82801FBM SATA AHCI Controller' If the controller above is present, the system is an ICH6M system in AHCI mode and no further action is required. - 'Intel® 82801FR SATA AHCI Controller' If the controller above is present, the system is an ICH6R system in AHCI mode and no further action is required. - If none of the controllers above are shown, then your system is not in AHCI mode. No other modes are supported by the Intel® Matrix Storage Manager software and you should continue with step 7 below. 7. Your system does not appear to be running in RAID or AHCI mode. If you feel that your system is running in RAID or AHCI mode and you do not see any of the controllers listed above, you may choose to contact your system manufacturer or place of purchase for assistance. ************************************************************ * 5. INSTALLING THE SOFTWARE ************************************************************ 5.1 General Installation Notes 1. If you are installing the operating system on a system configured for RAID or AHCI mode, you must pre-install the Intel® Matrix Storage Manager driver using the F6 installation method described in section 5.3. 2. The 'Intel® Chipset Software Installation Utility' must be installed on the system after a supported Microsoft* Windows* operating system has been installed. 3. To install the Intel® Matrix Storage Manager, double-click on the self-extracting and self-installing setup file and answer all prompts presented. 4. By default, all installed files (readme.txt, help, etc.) are copied to the following path: <bootdrive>\Program Files\Intel\Intel® Matrix Storage Manager 5.2 Windows Automated Installer* Installation from Hard Drive or CD-ROM Note: This method is applicable to systems configured for RAID or AHCI mode. 1. Download the Intel® Matrix Storage Manager setup file and double-click to self-extract and to begin the setup process. 2. The 'Welcome' window appears. Click Next to continue. 3. The 'Uninstallation Warning' window appears. Click Next to continue. 4. The 'Software License Agreement' window appears. If you agree to these terms, click Yes to continue. 5. The ?Readme File Information? window appears. Click Next to continue. 6. The 'Choose Destination Location' window appears. Click Next to continue. 7. The 'Select Program Folder' window appears. Click Next to continue installing the driver. 8. If the Windows Automated Installer* Wizard Complete window is shown without a prompt to restart the system, click the Finish button and proceed to step 8. If it is shown with a prompt to restart the system, click 'Yes, I want to restart my computer now.' (the default selection) and click the Finish button. Once the system has restarted, proceed to step 8. 9. To verify that the driver was loaded correctly, refer to section 6. 5.3 Pre-Installation Using the F6 Method. Note: The Steps 1 and 2 can be skipped if you use the F6 Floppy disk utility provided by Intel. This utility can also be downloaded from the following website. These methods are applicable to systems configured for RAID or AHCI mode. http://downloadfinder.intel.com/scripts-df/Product_Filter.asp? ProductID=2101 1. Extract all driver files from the installation package. See section 7.2 for instructions on extracting the files. 2. Create a floppy* containing the following files in the root directory: iaAhci.inf, iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and TxtSetup.oem. *Note: For Windows Vista you can use Floppy, CD/DVD or USB. 3. For Windows XP or later operating systems: -At the beginning of the operating system installation, press F6 to install a third party SCSI or RAID driver. -When prompted, select 'S' to Specify Additional Device. -continue to step 5. 4. For Windows Vista: -During the Operating system installation, after selecting the location to install Vista click on ?Load Driver? button to install a third party SCSI or RAID driver. -Continue to step 5. 5. When prompted, insert the floppy disk or media (Floppy, CD/DVD or USB) you created in step 2 and press Enter. 6. At this point you should be presented with a selection for one of the following depending on your hardware version and configuration: - Intel® 82801HEM SATA RAID Controller (Mobile ICH8M-E) - Intel® 82801HEM SATA AHCI Controller (Mobile ICH8M-E) - Intel® 82801HBM SATA AHCI Controller (Mobile ICH8M) - Intel® 82801HR/HH/HO SATA RAID Controller (Desktop ICH8R) - Intel® 82801HR/HH/HO SATA AHCI Controller (Desktop ICH8R) - Intel® 631xESB/632xESB SATA RAID Controller (Workstation ESB2) - Intel® 82801GHM SATA RAID Controller (Mobile ICH7RM) - Intel® 82801GBM SATA AHCI Controller (Mobile ICH7M) - Intel® 82801GR/GH SATA RAID Controller (Desktop ICH7R/DH) - Intel® 82801GR/GH SATA AHCI Controller (Desktop ICH7R/DH) - Intel® 82801FR SATA RAID Controller (Desktop ICH6R) - Intel® 82801FR SATA AHCI Controller (Desktop ICH6R) - Intel® 82801FBM SATA AHCI Controller (Mobile ICH6M) 7. Highlight the selection that is appropriate for the hardware in your system and press Enter. 8. Press Enter again to continue. Leave the floppy disk in the system until the next reboot as the software will need to be copied from the floppy disk again when setup is copying files. ************************************************************ * 6. VERIFYING INSTALLATION OF THE SOFTWARE ************************************************************ 6.1 Verifying Have Disk, F6, or Unattended Installation: depending on your system configuration, refer to the appropriate sub-topic below: 6.1a Systems Configured for RAID Mode: 1. On the Start menu: 1a. For Windows* XP or later operating systems, select Control Panel. 2. Open the 'System' applet (you may first have to select 'Switch to Classic View'). 3. Select the 'Hardware' tab in Windows* XP or Windows* Server 2003. 4. Select the 'Device Manager' button 5. Expand the 'Storage Controllers' (for Windows Vista) or 'SCSI and RAID Controllers' (for Windows XP and later operating systems) entry. 6. Right-click on 'Intel® 82801GR SATA RAID Controller' This same procedure can also be used for systems using the 'Intel® 82801HR/HH/HO SATA RAID Controller', the 'Intel® 631xESB/632xESB SATA RAID Controller', the 'Intel® 82801GHM SATA RAID Controller', the 'Intel® 82801GH SATA RAID Controller', and the 'Intel® 82801FR SATA RAID Controller'. 7. Select 'Properties'. 8. Select the 'Driver' tab. 9. Select the 'Driver Details' button. 10. If the 'iaStor.sys' file is displayed, then installation was successful. 6.1b Systems Configured for AHCI Mode: 1. On the Start menu: 1a. For Windows* 2000, select Settings and then select Control Panel. 1b. For Windows* XP or later operating systems, select Control Panel. 2. Open on the 'System' applet (you may first have to select 'Switch to Classic View'). 3. Select the 'Hardware' tab in Windows* XP or Windows* Server 2003. 4. Select the 'Device Manager' button 5. Expand the 'IDE ATA/ATAPI controllers' entry 6. Right-click on 'Intel® 82801GR SATA AHCI Controller' This same procedure can also be used for systems using the 'Intel® 82801HR/HH/HO SATA AHCI Controller', the 'Intel® 631xESB/632xESB SATA AHCI Controller', the 'Intel® 82801GBM SATA AHCI Controller', the 'Intel® 82801GH SATA AHCI Controller' and the 'Intel® 82801FR SATA AHCI Controller'. 7. Select 'Properties' 8. Select the 'Driver' tab 9. Select the 'Driver Details' button 10. If the 'iaStor.sys' file is displayed, the installation was successful. 6.2 Verifying Windows Automated Installer* or 'Package for the Web' Installations: 1. Click 'Start'. 2. Find the 'Intel® Matrix Storage Manager' program group. 3. Select the 'Intel® Matrix Storage Console' entry 4. The 'Intel® Matrix Storage Console' application should launch. 5. If this application does not launch, the Intel® Matrix Storage Manager driver was not installed properly and setup needs to be run. ************************************************************ * 7. ADVANCED INSTALLATION INSTRUCTIONS ************************************************************ 7.1 Available Setup Flags: -? The installer presents a dialog showing all the supported setup flags (shown here) and their usage. -A Extracts all files (does not install driver) to <path> if -P is also supplied; otherwise, the files are extracted to the default location. -B Forces a system reboot after installation -O<name> Allows for the customization of the program folder name for the Intel® Matrix Storage Console, which will appear in the Start, 'All Programs' menu. -P<path> Supplies target path when using -A flag -N Installs all components except driver -NoGUI Installs only the driver; the Intel® Matrix Storage Console, Event Monitor, and Tray icon applet are not installed. -NoMon Disables the Event Monitor which consists of the Disk Monitor Service and the System Tray Icon Applet. -S Silent install (no user prompts) -BUILD Displays build information -G<number> Forces a particular language install (See section 3 for a table mapping <number> to language). There cannot be a space between -G and <number> -f2<path\name> Creates a log file in <existing path> with <name>; this is to be used during silent installation. There cannot be a space between -f2 and <path\name>, and the path must exist prior to installation. Notes: Flags and their parameters are not case-sensitive. Flags may be supplied in any order, with the exception of the -S and -G, which must be supplied last. When using the -A flag, a target path may be specified via the -P flag, and the -O, -G, -S, and -N flags are ignored. When using the -P, -O, -G and -f2 flags, there should be no space between the flag and the argument. When using the -f2 flag, a log file name and path must be specified, and the path must exist prior to the installation. 7.2 Use one of the following command examples to extract the driver files from the different package types: c:\iata_cd.exe -pc:\<path> c:\iata_enu.exe -pc:\<path> c:\setup.exe -pc:\<path> When run, the installation process begins; simply click through the dialogs as prompted. This will not install the driver, it will only extract the driver files to <path>. After the extraction is completed, the driver files can be found in <path>\Driver. 7.3 To install the RAID driver on Windows* XP, as outlined in the Microsoft document 'Deployment Guide Automating Windows NT Setup', use the supplied TXTSETUP.OEM file included in this package and insert the lines shown in step 7.3a and 7.3b below into the UNATTEND.TXT file. This method is available for Microsoft* Windows* XP, Windows 2000, and Windows Server 2003. Before you begin, iaAhci.inf, iaAhci.cat, iaStor.inf, iaStor.cat, iaStor.sys, and Txtsetup.oem files will need to be extracted from the setup files. To extract these files, use the method described in section 7.2 above. 7.3a Systems Configured for RAID Mode: Note: The same procedure can be used for systems using the 'Intel® 82801HEM SATA RAID Controller', 'Intel® 82801HR/HH/HO SATA RAID Controller', 'Intel® 631xESB/632xESB SATA RAID Controller', 'Intel® 82801GHM SATA RAID Controller', 'Intel® 82801GH SATA RAID Controller', and 'Intel® 82801FR SATA RAID Controller'. Simply replace the text within the quotation marks. // Insert the lines below into the UNATTEND.TXT file [MassStorageDrivers] "Intel® 82801GR SATA RAID Controller" = OEM [OEMBootFiles] iaStor.inf iaStor.sys iaStor.cat Txtsetup.oem 7.3b Systems Configured for AHCI Mode: Note: The same procedure can be used for systems using the 'Intel® 82801HEM SATA AHCI Controller', 'Intel® 82801HBM SATA AHCI Controller', 'Intel® 82801HR/HH/HO SATA AHCI Controller', 'Intel® 631xESB/632xESB SATA AHCI Controller', 'Intel® 82801GBM SATA AHCI Controller', 'Intel® 82801GH SATA AHCI Controller', and 'Intel® 82801FR SATA AHCI Controller'. Simply replace the text within the quotation marks. // Insert the lines below into the UNATTEND.TXT file [MassStorageDrivers] "Intel® 82801GR SATA AHCI Controller" = OEM [OEMBootFiles] iaAhci.inf iaStor.sys iaAhci.cat Txtsetup.oem ************************************************************ * 8. IDENTIFYING THE SOFTWARE VERSION NUMBER ************************************************************ 8.1 Use the following steps to identify the software version number following a Have Disk, F6, or unattended installation. 8.1a Systems Configured for RAID Mode: 1. On the Start menu: 1a. For Windows* XP or later operating systems, select Control Panel. 2. Open the 'System' applet (you may first have to select 'Switch to Classic View'). 3. Select the 'Hardware' tab in Windows* XP or Windows* Server 2003, or select the 'Settings' tab in Windows* 2000 4. Select the 'Device Manager' button 5. Expand the 'SCSI and RAID Controllers' entry. 6. Right-click on 'Intel® 82801HEM SATA RAID Controller' This same procedure can also be used for systems using the 'Intel® 82801GR SATA RAID Controller', the 'Intel® 82801HR/HH/HO SATA RAID Controller', the 'Intel® 631xESB/632xESB SATA RAID Controller', the 'Intel® 82801GHM SATA RAID Controller', the 'Intel® 82801GH SATA RAID Controller' and the 'Intel® 82801FR SATA RAID Controller'. 7. Select 'Properties' 8. Select the 'Driver' tab 9. The software version should be displayed after 'Driver Version:' 8.1b Systems Configured for AHCI Mode: 1. On the Start menu: 1a.For Windows* XP or later operating systems, select Control Panel. 2. Open the 'System' applet (you may first have to select 'Switch to Classic View'). 3. Select the 'Hardware' tab in Windows* XP or Windows* Server 2003 4. Select the 'Device Manager' button 5. Expand the 'IDE ATA/ATAPI controllers' entry 6. Right-click on 'Intel® 82801HEM SATA AHCI Controller' This same procedure can also be used for systems using the 'Intel® 82801HBM SATA AHCI Controller', the 'Intel® 82801GR SATA AHCI Controller', the 'Intel® 82801HR/HH/HO SATA AHCI Controller', the 'Intel® 631xESB/632xESB SATA AHCI Controller', the 'Intel® 82801GBM SATA AHCI Controller', the 'Intel® 82801GH SATA AHCI Controller' and the 'Intel® 82801FR SATA AHCI Controller'. 7. Select 'Properties'. 8. Select the 'Driver' tab. 9. The software version is displayed after 'Driver Version:'. 8.2 Identify the software version for Windows Automated Installer* or 'Package for the Web' Installations: 1. Click 'Start' menu, 'All Programs' menu, 2. Find the 'Intel® Matrix Storage Manager' program group 3. Select the 'Intel® Matrix Storage Console' item 4. The 'Intel® Matrix Storage Console' application will be shown, with the version shown in the splash screen. The version can also be viewed by selecting 'About' from within the 'Help' menu. ************************************************************ * 9. UNINSTALLING THE SOFTWARE ************************************************************ 9a. UNINSTALLATION NON-DRIVER COMPONENTS Removal of this software from the system will render any Serial ATA hard drives inaccessible by the operating system; therefore, uninstallation procedure will only uninstall non-critical components of this software (user interface, start menu links, etc.). To remove critical components, see section 9b. Use the following procedure to uninstall the software: 1. Select 'Uninstall' from the following Start menu folder: * All Programs->Intel® Matrix Storage Manager 2. The uninstall program will start. Click through the options for the uninstallation. 9b. UNINSTALLATION OF DRIVER COMPONENTS The removal of this software from the system will render any Serial ATA hard drives inaccessible by the operating system. Back up any important data before completing these steps. 1) If the system is in RAID mode, delete any RAID volumes using the Intel® Matrix Storage Manager option ROM user interface. 2) Reboot the system. 3) Enter the system BIOS (usually done by pressing a key such as 'F2' or 'Delete' during system boot). 4) Disable 'Intel® RAID Technology' and 'SATA AHCI mode'. 5) Reinstall the operating system. Note: If you experience any difficulties making these changes to the system BIOS, please contact the motherboard manufacturer or your place of purchase for assistance. ************************************************************ * 10. ENTERING THE OPTION ROM USER INTERFACE ************************************************************ Use the following steps to enter the Intel® Matrix Storage Manager option ROM user interface: 1. Boot the System. 2. Press CTRL-I when the 'Intel® Matrix Storage Manager option ROM vX.y.w.zzzz' banner screen appears. ************************************************************ * 11. OPTION ROM RAID VOLUME MANAGEMENT ************************************************************ The Intel® Matrix Storage Manager option ROM provides pre-OS RAID volume management which enables the following: 1. Create a RAID volume Use this option to create a Recovery volume or one or two RAID volumes. 2. Delete a RAID volume Use this option to delete a Recovery volume or RAID volume. 3. Reset to non-RAID Hard Disks Use this option to reset a RAID configuration to a non-RAID configuration. 4. Recovery volume options If a recovery volume is present, use this option to a. Disable Continuous Update b. Boot to a Recovery Disk c. Boot to a Master Disk ************************************************************ * 12. OPTIONS TO RESET THE RAID VOLUME in Option ROM ************************************************************ Intel® Matrix Storage option ROM user interface provides two methods for resetting the RAID volume, 1. Delete RAID Volume 2. Reset Disk to Non-RAID Differences between the options are noted below. Users are advised to select the option based on the situation. 12.1 Reset Disk to Non-RAID This option is used to reset the metadata on the disk which participates in more than one RAID volume in single operation. It should be used if 'Delete RAID Volume' option fails for any reason and to reset a disk that has been marked as Spare and offline member. When a disk in the RAID volume is reset to non-RAID, RAID metadata is erased. However, partition table and file system related data still exists, which may be invalid. This might cause Windows installer to misinterpret the information available on the 'reset disk' at the time of installation. This could result in unexpected behavior in OS installation. 12.2 Delete RAID Volume When a RAID volume is deleted, RAID metadata on the participating disks is erased and sector zero is cleared, that is partition table and file system related data are reset. Windows installer will not see any invalid data at the time of OS installation. This is the recommended method for reconfiguring the RAID volume and installing OS on it. ************************************************************ * 13. VERIFYING THE VERSION OF THE OPTION ROM SOFTWARE ************************************************************ 1. Use the following steps to identify the version number of Intel® Matrix Storage option ROM: - Enter the Intel® Matrix Storage option ROM user interface using the steps detailed in section 10. - The software version will be displayed in the user interface banner: 'Intel® Matrix Storage Manager option ROM vX.y.w.zzzz' X.y.w.zzzz is the version number of the option ROM installed on your system. X.y.w - Product release number X - Major number y - Minor number w - Hotfix number zzzz - Build number ************************************************************ * DISCLAIMER ************************************************************ Information in this document is provided in connection with Intel products. Except as expressly stated in the INTEL SOFTWARE LICENSE AGREEMENT contained herein, no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products, including liability or warranties relating to fitness for a particular purpose, merchantability or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, lifesaving, or life sustaining applications. ************************************************************ * Intel Corporation disclaims all warranties and liabilities * for the use of this document, the software and the * information contained herein, and assumes no * responsibility for any errors which may appear in this * document or the software, nor does Intel make a commitment * to update the information or software contained herein. * Intel reserves the right to make changes to this document * or software at any time, without notice. ************************************************************ * Third-party brands and names may be claimed as the property of others. Copyright © Intel Corporation, 2001-2007 ************************************************************ * INTEL SOFTWARE LICENSE AGREEMENT ************************************************************ INTEL SOFTWARE LICENSE AGREEMENT (OEM / IHV / ISV Distribution & Single User) IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. Please Also Note: * If you are an Original Equipment Manufacturer (OEM), Independent Hardware Vendor (IHV), or Independent Software Vendor (ISV), this complete LICENSE AGREEMENT applies; * If you are an End-User, then only Exhibit A, the INTEL SOFTWARE LICENSE AGREEMENT, applies. For OEMs, IHVs, and ISVs: LICENSE. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. Subject to the terms of this Agreement, Intel grants to you a nonexclusive, nontransferable, worldwide, fully paid-up license under Intel's copyrights to: a) use, modify and copy Software internally for your own development and maintenance purposes; and modify, copy and distribute Software, including derivative works of the Software, to your end-users, but only under a license agreement with terms at least as restrictive as those contained in Intel's Final, Single User License Agreement, attached as Exhibit A; and c) modify, copy and distribute the end-user documentation which may accompany the Software, but only in association with the Software. If you are not the final manufacturer or vendor of a computer system or software program incorporating the Software, then you may transfer a copy of the Software, including derivative works of the Software (and related end-user documentation) to your recipient for use in accordance with the terms of this Agreement, provided such recipient agrees to be fully bound by the terms hereof. You shall not otherwise assign, sublicense, lease, or in any other way transfer or disclose Software to any third party. You shall not reverse- compile, disassemble or otherwise reverse-engineer the Software. Except as expressly stated in this Agreement, no license or right is granted to you directly or by implication, inducement, estoppel or otherwise. Intel shall have the right to inspect or have an independent auditor inspect your relevant records to verify your compliance with the terms and conditions of this Agreement. CONFIDENTIALITY. If you wish to have a third party consultant or subcontractor ("Contractor") perform work on your behalf which involves access to or use of Software, you shall obtain a written confidentiality agreement from the Contractor which contains terms and obligations with respect to access to or use of Software no less restrictive than those set forth in this Agreement and excluding any distribution rights, and use for any other purpose. Otherwise, you shall not disclose the terms or existence of this Agreement or use Intel's name in any publications, advertisements, or other announcements without Intel's prior written consent. You do not have any rights to use any Intel trademarks or logos. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time and without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES. EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND, INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. EXHIBIT "A" INTEL SOFTWARE LICENSE AGREEMENT (Final, Single User) IMPORTANT - READ BEFORE COPYING, INSTALLING OR USING. Do not use or load this software and any associated materials (collectively, the "Software") until you have carefully read the following terms and conditions. By loading or using the Software, you agree to the terms of this Agreement. If you do not wish to so agree, do not install or use the Software. LICENSE. You may copy the Software onto a single computer for your personal, noncommercial use, and you may make one back-up copy of the Software, subject to these conditions: 1. This Software is licensed for use only in conjunction with Intel component products. Use of the Software in conjunction with non-Intel component products is not licensed hereunder. 2. You may not copy, modify, rent, sell, distribute or transfer any part of the Software except as provided in this Agreement, and you agree to prevent unauthorized copying of the Software. 3. You may not reverse engineer, decompile, or disassemble the Software. 4. You may not sublicense or permit simultaneous use of the Software by more than one user. 5. The Software may contain the software or other property of third party suppliers, some of which may be identified in, and licensed in accordance with, any enclosed "license.txt" file or other text or file. OWNERSHIP OF SOFTWARE AND COPYRIGHTS. Title to all copies of the Software remains with Intel or its suppliers. The Software is copyrighted and protected by the laws of the United States and other countries, and international treaty provisions. You may not remove any copyright notices from the Software. Intel may make changes to the Software, or to items referenced therein, at any time without notice, but is not obligated to support or update the Software. Except as otherwise expressly provided, Intel grants no express or implied right under Intel patents, copyrights, trademarks, or other intellectual property rights. You may transfer the Software only if the recipient agrees to be fully bound by these terms and if you retain no copies of the Software. LIMITED MEDIA WARRANTY. If the Software has been delivered by Intel on physical media, Intel warrants the media to be free from material physical defects for a period of ninety (90) days after delivery by Intel. If such a defect is found, return the media to Intel for replacement or alternate delivery of the Software as Intel may select. EXCLUSION OF OTHER WARRANTIES EXCEPT AS PROVIDED ABOVE, THE SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. Intel does not warrant or assume responsibility for the accuracy or completeness of any information, text, graphics, links or other items contained within the Software. LIMITATION OF LIABILITY. IN NO EVENT SHALL INTEL OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, BUSINESS INTERRUPTION, OR LOST INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE THE SOFTWARE, EVEN IF INTEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS PROHIBIT EXCLUSION OR LIMITATION OF LIABILITY FOR IMPLIED WARRANTIES OR CONSEQUENTIAL OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOU MAY ALSO HAVE OTHER LEGAL RIGHTS THAT VARY FROM JURISDICTION TO JURISDICTION. TERMINATION OF THIS AGREEMENT. Intel may terminate this Agreement at any time if you violate its terms. Upon termination, you will immediately destroy the Software or return all copies of the Software to Intel. APPLICABLE LAWS. Claims arising under this Agreement shall be governed by the laws of California, excluding its principles of conflict of laws and the United Nations Convention on Contracts for the Sale of Goods. You may not export the Software in violation of applicable export laws and regulations. Intel is not obligated under any other agreements unless they are in writing and signed by an authorized representative of Intel. GOVERNMENT RESTRICTED RIGHTS. The Software is provided with "RESTRICTED RIGHTS." Use, duplication, or disclosure by the Government is subject to restrictions as set forth in FAR52.227-14 and DFAR252.227-7013 et seq. or their successors. Use of the Software by the Government constitutes acknowledgment of Intel's proprietary rights therein. Contractor or Manufacturer is Intel Corporation, 2200 Mission College Blvd., Santa Clara, CA 95052. SLAOEMISV1/RBK/01-21-00 LANGUAGE; TRANSLATIONS. In the event that the English language version of this Agreement is accompanied by any other version translated into any other language, such translated version is provided for convenience purposes only and the English language version shall control. http://rapidshare.com/files/237219270/Windows_XP_SP3_Raid_Packli.Notebooklara.XP.kurmak.icin.Yeni.part1.rarhttp://rapidshare.com/files/237232008/Windows_XP_SP3_Raid_Packli.Notebooklara.XP.kurmak.icin.Yeni.part2.rarhttp://rapidshare.com/files/237243538/Windows_XP_SP3_Raid_Packli.Notebooklara.XP.kurmak.icin.Yeni.part3.rarhttp://rapidshare.com/files/237253561/Windows_XP_SP3_Raid_Packli.Notebooklara.XP.kurmak.icin.Yeni.part4.rarhttp://rapidshare.com/files/237263156/Windows_XP_SP3_Raid_Packli.Notebooklara.XP.kurmak.icin.Yeni.part5.rarhttp://rapidshare.com/files/237272365/Windows_XP_SP3_Raid_Packli.Notebooklara.XP.kurmak.icin.Yeni.part6.rarhttp://rapidshare.com/files/237274999/Windows_XP_SP3_Raid_Packli.Notebooklara.XP.kurmak.icin.Yeni.part7.rarhttp://rapidshare.com/files/237275747/Windows_XP_SP3_Raid_Packli.Notebooklara.XP.kurmak.icin.Yeni_Rar_Password.txt[/CODE] Link to comment Share on other sites More sharing options...
Retkit Posted June 2, 2009 Share Posted June 2, 2009 Maalesef İşe yaramadı.Hard diski görmüyor.Bahsettiğin raid yüklü değil.İnsanları kandırmayın.. Link to comment Share on other sites More sharing options...
mersinli25 Posted June 5, 2009 Share Posted June 5, 2009 AZıcık cümleyle çok iş çok cümleyle iş ortada Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.