Jump to content

Portable Latencymon 7.0 Native


Recommended Posts

Portable LatencyMon 7.0 Native|Packed in VMware ThinApp|Windows(x86/x64)|rar|8.60 mb

Portable LatencyMon 7.0 Native checks if your system is suitable for handling real time audio by measuring DPC and ISR routine execution latencies as well as hard page faults.

Dear users! We do not forget about our rights holders!
All portable assembly, designed exclusively for the promotion of the software and can be used for informational purposes only!
After testing the program and decide on the usefulness and necessity of you, this software - you are required! remove the assembly and turn to the developer, to purchase a license for a full version. Good luck!
Release Notes

LatencyMon checks if a system running Windows is suitable for processing real-time audio and other tasks. LatencyMon analyzes the possible causes of buffer underruns by measuring kernel timer latencies and reporting DPC and ISR execution times as well as hard pagefaults. It will provide a comprehensible report and find the kernel modules and processes responsible for causing audio latencies which result in drop outs. It also provides the functionality of an ISR monitor, DPC monitor and a hard pagefault monitor.
LatencyMon will display the highest latencies of a kernel timer and report the highest execution times of ISR and DPC routines as well as hard pagefaults. In most cases it will also find the drivers and processes responsible for executing them. It will create a comprehensible report which also displays all sampled data in a detailed manner allowing you to perform in-depth analysis.

Release New

Bug Fixed: interrupt to process measurements could report wrong value
The value reported as the interrupt to process interval as well as the interrupt to DPC interval could be wrong in case multiple processor groups were active in the system. This problem has been fixed.
Bug Fixed: number of processors wrongly reported if more than 64 CPUs
In case LatencyJMon or IDLT was run on a system with more than 64 logical CPUs, the number of total CPUs in the system was misreported. This has been fixed.
Bug Fixed: access violation
In rare cases, LatencyMon could display an access violation message while running. This has been fixed.
Latency spike at startup removed
LatencyMon could cause a latency spike at initialization. While this behavior was known and documented, the spike has been removed.
Faster startup times
LatencyMon (as well as IDLT) now starts up much faster than before.
User interface scaling support
LatencyMon allows you to reduce or enlarge the size of the user interface. This option is only available with the professional edition.
Support for visual user interface themes
LatencyMon allows you to select a user interface visual theme. This option is only available with the professional edition.
Visual options
The professional edition offers some options that allow you to change the appearance of the user interface.
User interface changes
Some changes have been applied to the user interface of LatencyMon to improve its appearance.
Customazible column orders
The professional edition now allows you to change the order of columns in views.
Select all and unselect all buttons
The CPUs to be monitoed options dialog now has two buttons that allow you to select and unselect all CPUs.
Clipboard support on views
All views now offer the option to copy items to the clipboard.
Text corrections
Some text corrections have been made to the report views.
Unspecified updates and changes
Several minor updates and changes have been applied to the software which are not specified.

System Requirements
- Restrictions: It does not correspond to the tablet mode.
- CPU: Intel Pentium 4 or later / AMD Athlon 64 or later (900 MHz or greater)
- (64bit support recommended)
- Memory: 4GB or more (Recommend 8GB or more)
- HDD: 10GB or more of free disk space
- Display: XGA (1,024x768), Full Color (24 bit or higher), 16-bit display (32-bit recommended)
Windows XP, Windows Vista all SP, Windows 7, Work on Windows 10 is POSSIBLE, BUT NOT GUARANTEED!
Language Multilanguage(Russian English)
(Buy premium account for maximum speed and resuming ability)



Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By artae
      Droid Transfer 1.48 Multilanguage Portable File size: 33.5 MB

      Android Transfer Software - Droid Transfer is a Windows application which works alongside a free Transfer Companion app for Android, allowing you to transfer SMS and MMS Messages from your Android Phone to your PC via a USB cable or over your local WiFi network.

      You can save your phone messages in a variety of file formats, including PDF, HTML or Text. Droid Transfer also saves any photos, emojis and videos in your messages, as well as dates and times they were received.

      Alternatively, Print your Android Phone Messages directly from Droid Transfer running on your PC.

      Save Messages and More from Android to your computer.
      Backup Android Messages to PC
      Export Text Messages to PDF
      Print SMS with Dates and Times
      Backup Contacts and Calendars
      Sync iTunes with Android
      Works Without Root Access

      Whats New:
      Updates: official site does not provide any info about changes in this version.

      HOMEPAGE https://www.wideanglesoftware.com/droidtransfer/
      http://nitroflare.com/view/CA69816FBFDCA0D/bmmo6.Droid.Transfer.1.48.Multilanguage.Portable.rar https://rapidgator.net/file/5d52e77468bc0fc21affe7c52f586d86/bmmo6.Droid.Transfer.1.48.Multilanguage.Portable.rar  
    • By karadurak
      Km Boot & PE v3 (X86 X64) 

      Km Boot içerik olarak güncellenmiştir. grub4dos ve grub2 görsel olarak aynıdır fakat zaman içerisinde farklı güncellemeler alarak yeni bir görünüme kavuşacaktır. 
      Grub4dos özel araçlar ile düzenlenip hızlandırılmıştır. Kullanımı hakkında ayrıntılı bilgi almak için KMPE konusunu ziyaret ediniz.
      Km Boot & PE v3 (X86 X64) 2020.09.01
      Iso Boyutu: 10,7 GB (11.570.769.920 bayt)
      Sistem gereksinimleri:
      CD / DVD sürücüsü veya USB'den önyükleme yapabilen PC.
      USB Sürücüye Kurulum: 
      Klasör Yapısı ve Kullanım:
        _ISO klasörü: Herhangi bir sürücünün ana dizinde _iso klasörü var ise windows isolarınızı 78-setup uygulaması otomatik olarak görür.  Hem Win Managerdan hemde KMPE den 78-setup a ulaşabilirsiniz. 78-setup'un kurulum imajlarını arayacağı klasörü değiştirebilirsiniz.  win manager için "_WIN\78SETUP.CFG" dosyası KMPE için "KMPE\_WIN\78SETUP.CFG" dosyasını notepad ile düzenleyiniz.     _WIN Klasörü: Herhangi bir sürücünün ana dizinde _win klasörü var ise windows imajlarınızı (wim,esd,swm) klasör konumuna atıp win managerden otomatik kurulum yapabilirsiniz. (örneğin:_WIN\1064\install.wim) Win manager menüsüne hem multiboot ana menüsünden hem de KMPE içerisinden ulaşabilirsiniz. Win managerin kurulum klasörünü, menüdeki programları ya da düzenini değiştirebilirsiniz.  Win Manager için "_WIN\MBOOTMGR_1064.wcs"  KMPE için "KMPE\_WIN\MBOOTMGR_1064.wcs" dosyalarını notepad düzenleyiniz. İnstall.wim/esd öğesinin yanında bir yanıt dosyası ( * unattend.xml ) ve/veya $OEM$ klasörü varsa , Windows'u iki şekilde yükleyebilirsiniz:
      Manual Kurulum => ( unattend.xml yanıt dosyası ve/veya $OEM$ klasörü yok sayılır ve kuruluma  kaldığı yerden devam eder.)
      Otomatik Kurulum => (  unattend.xml yanıt dosyası ve/veya $OEM$ klasörü alınır  ve  kuruluma  kaldığı yerden devam eder. ) Sistemde otomatik etkinleştirme özelligi de vardır (yalnızca Windows'u Otomatik kurulum modunda yüklerken ( $OEM$ klasörü kullanılır ) Kullanılan etkinleştirme yöntemleri: Windows Loader 2.2.2 by Daz, Ratiborus'tan KMS etkinleştiricisi , HWID Yöntemi (Dijital Lisans)   EFI Klasörü: Multiboot, EFI/UEFI modunda yükleme desteği içeriyor.   EFI-x64 menüsü: grub2 modunda açılır. rEFind menü ile değiştirmek için EFI klasöründeki CMD dosyalarını kullanınız. EFI-x32 menüsü:  rEFind menü ile açılır. NOT: EFI/UEFI modunda önyükleme yapmak için, flash sürücünüzdeki EFI klasörünün bulunduğu bölüm FAT32 formatında olmalı ve PC niz UEFI önyüklemesini desteklemelidir.   BOOT Klasörü: Grub4dos ve Grub2 için menü dosyalarının bulunduğu ayrıca starsetup ve winmanager gibi sistemlerin başlangıç dosyalarının yer aldığı bölümdür. \BOOT\grub klasöründen menü dosyalarını notepad ile düzenleyebilirsiniz. KMPE Klasörü: KMPE montaj klasörüdür. Ayrıntı için sayfayı ziyaret ediniz. https://www.tnctr.com/topic/658892-kmpe-xp-8-10-x86x64-nativex86-2020_02_12/   ÖNEMLİ BİLGİLER !!!:   Koleksiyonda birçok program için "ilaç" uygulandı . Bu nedenle, antivirüslerin yanlış uyarılarından kaçınmak için, dağıtımı indirirken bunları kapatmanız veya dağıtım klasörünü antivirüsünüzün hariç tutulanlarına eklemeniz önerilir. Ek Görüntüler: 
    • By karadurak
      √· Km Pe Xp | 7 | 8 | 8.1 | 10 ( Native ) √·

      KMPE win10 32 ve 64 Bit olarak yeniden güncellemiştir. Yeni KmPE de Office 2010 ve  MTP ve MSI kurulum desteği gibi bir çok özellikler bulunmaktadır. Detayları aşağıdan öğrenebilirsiniz.
      Microsoft Office 2010 desteği Windows Yükleyici (MSI)  Yerel Windows Gezgini  DWM Hizmet Desteği MMC ( cihaz yöneticisi, disk yöneticisi, servis yöneticisi, dosya paylaşımı dahil ) BitLocker (Sadece kilitli sürücü açma işlevi ) Yerel Arama İşlevi  Temel ekran sürücüleri, (grafik sürücüsü) Ağ Desteği  WOW64 desteği (x64 ve x86 programlar aynı ortamda çalıştırılabilir) IE 11 (x64 ve x86) MTP desteği (cep telefonu bağlantı aktarımını destekler) RNDIS işlevi (USB bağlantısı ile cep telefonundan ağ paylaşımı yapılabilir) Yönetici hesabı girişi (AdminKmPE) Administrator ve System hesabı arasında geçiş yapma Paint, Windows Resim Görüntüleyici  VC ++ çalışma  kütüphanesi .NET Framework SnippingTool Ekran Görüntüsü Aracı  Yazıcı bileşenleri  Uzak Masaüstü Hizmetleri (Harici Uzak Masaüstü Bağlantısı PE) (RS5) SMB 1.0 Destegi  Ağ bulma (Aynı ağdaki bilgisayarda paylaşılan kaynaklara erişilebilir) Ağ ve Paylaşım Merkezi (Ağ Adaptörü Ayarları + Ağ Tepsisi Simgesi)  
      √· Km Pe Xp | 7 | 8 | 8.1 | 10 ( Native ) √· 2020.09.22
      İso Boyutu: 7,08 GB (7.608.205.312 bayt)
      Sistem gereksinimleri:
      1. RAM 1 GB / Native 512MB RAM (Eski PC)
      2. CD / DVD sürücüsü veya USB'den önyükleme yapabilen PC.
      Ekran Görüntüleri: 
      USB Sürücüye Kurulum: 
      MInstAll Programlar (x86 x64): 
      MS-DOS programları: 
      Masaüstü Resmini Değiştirme: 
      Masaüstü Uygulamalarını Değiştirme:
      MInstAll- Kmpe USB Program Ekleme ve Çıkarma:
      Harici Sürücü Ekleme:
      Dism++ ile  Dahili Sürücü Ekleme:
      Sabit Diske KMPE Kurulumu (Win10 UEFI): 
      KMPE'den Windows Kurulumu:
      Multiboot'a Ekleme:
      Dizin Yapısı:
      Sistemi Günceleme:
      Reg ve CMD komutu Ekleme:
      Kmpe USB Videolu Egitimler:
      Tavisiyelerinizi , bulduğunuz faydalı programları  ve hataları mümkünse çözüm önerileriyle birlikte konu başlığı altında paylaşabilirsiniz.
    • By qxqx
      BELOFF [dp] 2022.07.1

      A collection of programs for automatic driver installation in Windows x86-x64.
      List of programs (Portable)

      BELOFF [dp] 2022.07.1

      Snappy Driver Installer 1.22.1
      DriverPack Solution 16.22
      Auslogics Driver Updater
      Driver Easy Professional
      IObit Driver Booster
      Display Driver Uninstaller

      UpdatePack 7 22.2.10
      SmartFix Tool 2.4.7

      Acronis Media (Acronis Disk Director 12 build 12.5.163 Server + Acronis True Image 2020 build 25700)
      Paragon Hard Disk Manager 15 Premium
      SmartFix 2.4 WinPE
      ASTRA 6.60
      GoldMemory 7.85 Pro
      Memtest86 8.3/4.3.7
      Memtest86+ 5.01
      MHDD 4.6
      Victoria 3.52.3
      Kon-Boot 2.5
      HDD Regenerator 2011
      At the root of the image is the utility "Burn ISO to flash drive.exe".
      Place it next to the ISO file, run it and follow the instructions (Format the flash drive and record). Or use other methods that are convenient for you.
      Download BELOFF image [dp] 2022.07.1 (11.5 GB):

      ISO Image Checksum:
      MD5: 7EEF59DFE8E2DA975A994C59BD15A870
      SHA-1: 813151F823775AB7294985C6CBB0DC7E06F33951

    • By artae
      RiDoc Multilingual Portable | 26.5 Mb

      RiDoc - the program for getting images from a scanner and reduction image files sizes.

      The programme provides an opportunity to reduce the size of the electronic version of documents or image files without losing information quality.
      Document scanning:
      RiDoc is a simple tool for scanning and reducing the size of scanned documents (up to 80%) without compromising on image quality.
      RiDoc lets you scan to a PDF, JPEG, BMP, PNG or TIFF file and supports multi-page PDF and TIFF documents. It can also export a scan into an MS Word document.
      Emailing documents scanned by RiDoc is fast and cost-efficient thanks to the compact size of files produced by the program.
      RiDoc supports automatic document feeding (ADF), so you can scan several documents automatically, then process them in a single batch.
      Text recognition (OCR):
      RiDoc allows you to convert scanned documents into editable text. A tool like this should always be within reach when you need to turn a simple document into an editable text file on your computer.
      To recognize text from a document, you can scan a new one or open an existing image file (BMP, PNG, JPEG or multi-page TIFF).
      RiDoc uses the Tesseract OCR ee, a free product currently supporting a huge number of languages.
      Creation of document copies:
      RiDoc will create a copy of your document and print it the necessary number of s. Prior to sending a document to print, RiDoc enables you to adjust its brightness and contrast. Somes, the brightness/contrast ratio of a scanned document is not perfect, which results in the poor readability of the scan, hardly discernible signatures, stamps and other elements. This can potentially lead to the loss of important information and difficulty in verifying the authenticity of a document copy. The same issues are characteristic of copiers, so users are forced to make extra copies, thus wasting lots of paper.
      RiDoc doesn't have this problem you only send a scan to print after you've made sure it has the necessary quality.
      Use the watermarking feature to protect your documents. You can select a style, color, opacity and size for your watermarks.
      Creating document archives:
      The easiest method of organizing your documents is to sort them into folders according to certain selection criteria. Searching for and opening the necessary folder can be a tedious and tiring process.
      The "Quick Folders" feature is a convenient tool for the quick saving of documents to the necessary folders. First, create a list of folders your documents will be saved to. When saving a document, make a single click on the name of the necessary folder in the "Quick Folders" list and your document will be saved right away.
      Windows 7, 8/8.1, 10, 11
      (Buy premium account for maximum speed and resuming ability)



  • Recently Browsing   0 members

    No registered users viewing this page.

  • Create New...