EmirOuTLaW Posted August 18, 2022 Share Posted August 18, 2022 (edited) Windows 10 X64 son sürümdeyim. Ayarlar ağ bağlantıları bölümünde Uçak Modu hiç yok. uçak modu aktif kalmış bir türlü uçak modundan çıkamıyorum. internet teki tüm ayarları yaptım fakat aktif olmuyor bir türlü. Dün çalışan TP-Link TL-WN321G USB anten artık çalışmıyor. (Başka PC de hatta Windows 7 çalışıyor) Bakım programları, 360 Total Security ve hatırlamadığım services.msc ayarlarını değiştirdikten sonra çalışmıyor. Driverını tekrar kurdum olmadı. Services.msc de ilgili olduğunu düşündüğüm birçok hizmeti default yaptım ama olmuyor. Sistem geri yükleme kapalı ve format atamam. Edited August 18, 2022 by EmirOuTLaW Quote Link to comment Share on other sites More sharing options...
iomerg Posted August 18, 2022 Share Posted August 18, 2022 Kablosuz Yerel Ağ Otomatik Yapılandırma hizmetini otomatiğe alıp başlatın. yine de çalışmazsa devre dışı olan hizmet listesinin ekran görüntüsünü atın Quote Link to comment Share on other sites More sharing options...
TR_by Posted August 18, 2022 Share Posted August 18, 2022 Radyo yönetim hizmetini kapatmış olabilirsin, aşağıdaki reg uygula ve sistemi yeniden başlatıp dene. Please register to see this content. Quote Link to comment Share on other sites More sharing options...
EmirOuTLaW Posted August 18, 2022 Author Share Posted August 18, 2022 TR_by, 4 saat önce yazdı: Radyo yönetim hizmetini kapatmış olabilirsin, aşağıdaki reg uygula ve sistemi yeniden başlatıp dene. iomerg, 11 saat önce yazdı: Kablosuz Yerel Ağ Otomatik Yapılandırma hizmetini otomatiğe alıp başlatın. yine de çalışmazsa devre dışı olan hizmet listesinin ekran görüntüsünü atın Radio hizmeti otomatik çalışıyor zaten ayrıca regedit te radioenable ayarını 0 yaptım 1 yaptım olmadı aynı versiyon diğer pc de bunlar hiç yok ama sorunsuz çalışıyor bence bununla ilgili değil bende ayarlarda gözükmüyor. Please register to see this content. Quote Link to comment Share on other sites More sharing options...
akillialtay1995 Posted August 18, 2022 Share Posted August 18, 2022 Hocam bence yeni bir wifi adaptör almanı tavsiye ederim. Ya da interneti kablolu kullan. 1 Quote Link to comment Share on other sites More sharing options...
EmirOuTLaW Posted August 18, 2022 Author Share Posted August 18, 2022 (edited) akillialtay1995, 4 saat önce yazdı: iomerg, 16 saat önce yazdı: Kablosuz Yerel Ağ Otomatik Yapılandırma hizmetini otomatiğe alıp başlatın. yine de çalışmazsa devre dışı olan hizmet listesinin ekran görüntüsünü atın Usta tüm services.msc listesi ek' te Please register to see this content. Edited August 18, 2022 by EmirOuTLaW Quote Link to comment Share on other sites More sharing options...
avis Posted August 19, 2022 Share Posted August 19, 2022 akillialtay1995, 7 saat önce yazdı: Hocam bence yeni bir wifi adaptör almanı tavsiye ederim. Ya da interneti kablolu kullan. Arkadaş başka pc de çalıştığını yazmış neden yenisini alsın veya kablolu kullansın? 1 Quote Link to comment Share on other sites More sharing options...
umd Posted August 19, 2022 Share Posted August 19, 2022 Bir farklı modeli de bende var ...Sorun tamamen driverla alakalı.Güncelleyince buton pasif hale geliyor.Driver kaldırıp windows un kendi gördüğü sürücü ile kullanıyorum.Güncelleme yaptıysanız kaldırıp deneyin bi. 1 Quote Link to comment Share on other sites More sharing options...
MamLeter Posted August 19, 2022 Share Posted August 19, 2022 (edited) Sistemde engelleme veya benzerini yapan uygulamalarla engellemeler yapıldığında, bu duruma şahit oldum. Programa uyumlu olmayan windows sürümlerinde bu oluyor genelde. Siz kullandınız mı? Bilmiyorum. Bugün yeni insider sürümünde aynısı başıma geldi, ne yaptıysam düzelmedi. Engelleme yaptığım programla ayarları geri alıp, yeniden başlatınca düzeldi. Yaptığınız reg vs ayarını (varsa eğer) geri almayı deneyebilirsiniz. Edited August 19, 2022 by MamLeter Quote Link to comment Share on other sites More sharing options...
EmirOuTLaW Posted August 19, 2022 Author Share Posted August 19, 2022 umd, 1 saat önce yazdı: Bir farklı modeli de bende var ...Sorun tamamen driverla alakalı.Güncelleyince buton pasif hale geliyor.Driver kaldırıp windows un kendi gördüğü sürücü ile kullanıyorum.Güncelleme yaptıysanız kaldırıp deneyin bi. Usta o driver ları belki 50 defa abartmıyorum kaldırıp kurdum odada aynı sürüm 5 tane pc var hepsinde sorunsuz çalışıyor. Onlardan 4 farklı backup programı hatta cmd ile bile backup yapıp bu pc de kurdum olmadı. MamLeter, 38 dakika önce yazdı: Sistemde engelleme veya benzerini yapan uygulamalarla engellemeler yapıldığında, bu duruma şahit oldum. Programa uyumlu olmayan windows sürümlerinde bu oluyor genelde. Siz kullandınız mı? Bilmiyorum. Bugün yeni insider sürümünde aynısı başıma geldi, ne yaptıysam düzelmedi. Engelleme yaptığım programla ayarları geri alıp, yeniden başlatınca düzeldi. Yaptığınız reg vs ayarını (varsa eğer) geri almayı deneyebilirsiniz. Ustad tüm regedit ve services.msc ayarlarını stock yaptım diğer pc dekilerle aynı yaptım olmadı. Ayarlar menüsün deki wifi uçak modu hiç yok nasıl. Çalıştığı zamanda yoktu gerçi orası. avis, 7 saat önce yazdı: Arkadaş başka pc de çalıştığını yazmış neden yenisini alsın veya kablolu kullansın? Hatta O zaman kablolu kullan yazdı. O yorumu silindi site tarafından. Cevap verip Ban yememek için zor tuttum kendimi. Çünkü çok ağır konuşacaktım. 1 Quote Link to comment Share on other sites More sharing options...
MamLeter Posted August 19, 2022 Share Posted August 19, 2022 O sorun sadece formatla düzelir sanırım. Ama bir winpe yada linuxla usb den başlatıp. Yeri unuttum ama, (hatırlayanlar hemen yazar) driverların saklandığı klasörü elle silip açmayı deneyin birde. Quote Link to comment Share on other sites More sharing options...
EmirOuTLaW Posted August 19, 2022 Author Share Posted August 19, 2022 MamLeter, 25 dakika önce yazdı: O sorun sadece formatla düzelir sanırım. Ama bir winpe yada linuxla usb den başlatıp. Yeri unuttum ama, (hatırlayanlar hemen yazar) driverların saklandığı klasörü elle silip açmayı deneyin birde. Setup dosyasından dosyaları sakla seçeneği ile yükseltme yapmak geldi aklıma ama pc de ki programlar bozulmamalı binanın tüm sistemleri ona bağlı. O yüzden çekiniyorum. Windows system32/drivers klasöründen bahsediyorsun sanırım. Driverları silip tekrar kurdum çok defa olmadı. Quote Link to comment Share on other sites More sharing options...
akillialtay1995 Posted August 19, 2022 Share Posted August 19, 2022 Windows 7 de çalışıyor demişsin. O zaman önemli bilgilerini yedek alıp windows 7 kur. Belki adaptörün Windows 10 ile uyumlu değildir. Ondan bu hatayı veriyor olabilir. Quote Link to comment Share on other sites More sharing options...
disc2019 Posted August 19, 2022 Share Posted August 19, 2022 (edited) Pl do cross check eventlog & all dependent services for Wlan must be in either manual mode or auto. eg : 1. DNSCACHE 2. DCOMLAUNCH 3. DSMSVC 4. EVENTLOG 4. EVENTSYSTEM 5. NETPROFM 6. NETSETUPSVC 7. NLASVC 8. NSI 9. RMSVC 10. RPCEPTMAPPER 11. RPCSS 12. SYSTEMEVENTSBROKER 13. TIMEBROKERSVC 14. WCMSVC 15. LAST WLANSVC thanks Edited August 19, 2022 by disc2019 1 Quote Link to comment Share on other sites More sharing options...
MamLeter Posted August 19, 2022 Share Posted August 19, 2022 @disc2019 gönderisine bakın sonuç alamazsanız. 1 Quote Link to comment Share on other sites More sharing options...
EmirOuTLaW Posted August 19, 2022 Author Share Posted August 19, 2022 @MamLeterkardeşim ilk aklıma gelen yöntem bu hatta iso setup dan bile güncelleme yükseltme yapamayı düşündüm ama bunu yapmaya çekiniyorum özel programlar açılmazsa büyük sıkıntı olur binada. Ve servis en küçük 800 euro dan başlıyor. Dosya ve programlara bir şey olur mu acaba. disc2019, 1 saat önce yazdı: Pl do cross check eventlog & all dependent services for Wlan must be in either manual mode or auto. eg : 1. DNSCACHE 2. DCOMLAUNCH 3. DSMSVC 4. EVENTLOG 4. EVENTSYSTEM 5. NETPROFM 6. NETSETUPSVC 7. NLASVC 8. NSI 9. RMSVC 10. RPCEPTMAPPER 11. RPCSS 12. SYSTEMEVENTSBROKER 13. TIMEBROKERSVC 14. WCMSVC 15. LAST WLANSVC thanks I've already brought them to stock settings. Even all the services. :)) Quote Link to comment Share on other sites More sharing options...
disc2019 Posted August 19, 2022 Share Posted August 19, 2022 (edited) 1 hour ago, EmirOuTLaW said: @MamLeter my brother, this is the first method that came to my mind, I even thought of doing an update upgrade from the iso setup, but I hesitate to do this, if special programs are not opened, it will be a big problem in the building. And the service starts from the smallest 800 euro. Is there anything wrong with files and programs? I've already brought them to stock settings. Even all the services. :)) Ok brother . Have you done any new tweak in this current installed os . Have you used NTLite to barebon offline image which is currently installed on your hardware. If i were in turkey i must have provided you a USB wlan dongle of one of my friends company for free as i have atleast 100's of them in my office drauge Edited August 19, 2022 by disc2019 Quote Link to comment Share on other sites More sharing options...
EmirOuTLaW Posted August 19, 2022 Author Share Posted August 19, 2022 disc2019, 6 dakika önce yazdı: Ok brother . Have you done any new tweak in this current installed os . Have you used NTLite to barebon offline image which is currently installed on your hardware. Only, After doing maintenance with Advanced system care and 360 Total Security, it stopped working. Quote Link to comment Share on other sites More sharing options...
disc2019 Posted August 19, 2022 Share Posted August 19, 2022 (edited) 5 minutes ago, EmirOuTLaW said: Only, After doing maintenance with Advanced system care and 360 Total Security, it stopped working. sorry brother then i dont have any idea what happened at your end. kindly create an backup image of same os in forensic state means byte by byte data backup & install a fresh w10 os on same hardware & cross check if it will work. or use this usb wlan on another hardware with w10 installed same build | same service pack | same sku & cross check if it work there or not so that we can get exact point whats wrong either usb port or usb lan itself. Edited August 19, 2022 by disc2019 Quote Link to comment Share on other sites More sharing options...
EmirOuTLaW Posted August 19, 2022 Author Share Posted August 19, 2022 disc2019, 3 dakika önce yazdı: sorry brother then i dont have any idea what happened at your end. kindly create an backup image of same os in forensic state means byte by byte data backup & install a fresh w10 os on same hardware & cross check if it will work. or use this usb wlan on another hardware with w10 installed same build | same service pack | same sku & cross check if it work there or not so that we can get exact point whats wrong either usb port or usb lan itself. I'm on Windows 10 X64 latest version. There is no Airplane Mode in the settings network connections section. Airplane mode is still active and I can't get out of airplane mode. I have made all the settings on the internet, but it does not activate. The TP-Link TL-WN321G USB antenna that worked yesterday is no longer working. (Another PC is also running Windows 7) Maintenance programs don't work after changing 360 Total Security and services.msc settings that I don't remember. I reinstalled the driver. I have defaulted many services that I think are related in services.msc, but it does not work. System restore is turned off and I can't format Quote Link to comment Share on other sites More sharing options...
disc2019 Posted August 19, 2022 Share Posted August 19, 2022 too much confussion in your answer to my question i cant do anything now. firstly you state something else : 9 minutes ago, EmirOuTLaW said: Only, After doing maintenance with Advanced system care and 360 Total Security, it stopped working. secondly a new point comes out completly missleading out of support 2 minutes ago, EmirOuTLaW said: I'm on Windows 10 X64 latest version. There is no Airplane Mode in the settings network connections section. Airplane mode is still active and I can't get out of airplane mode. I have made all the settings on the internet, but it does not activate. The TP-Link TL-WN321G USB antenna that worked yesterday is no longer working. (Another PC is also running Windows 7) Maintenance programs don't work after changing 360 Total Security and services.msc settings that I don't remember. I reinstalled the driver. I have defaulted many services that I think are related in services.msc, but it does not work. System restore is turned off and I can't format Quote Link to comment Share on other sites More sharing options...
EmirOuTLaW Posted August 19, 2022 Author Share Posted August 19, 2022 Arkadaşlar iso dosyasınsan 1889 sürümüne yükseltme yaptım düzeldi. Teşekkür ederim konu kapanabilir. Çünkü başka çözüm yolu yok bende ki bu sorunun. 1 Quote Link to comment Share on other sites More sharing options...
bozart Posted August 25, 2022 Share Posted August 25, 2022 EmirOuTLaW, 19.08.2022 - 21:32 yazdı: Arkadaşlar iso dosyasınsan 1889 sürümüne yükseltme yaptım düzeldi. Teşekkür ederim konu kapanabilir. Çünkü başka çözüm yolu yok bende ki bu sorunun. Yani Windows ile alakalımi bu sorun.. Hangi Windows da hata verdi. Hangi Windows u kurunca düzeldi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.